A.64 kb/s
B.91.2 kb/s
C.173 kb/s
D.183 kb/s
E.211 kb/s
您可能感興趣的試卷
你可能感興趣的試題
A.Enable the IGMP snooping capability and define the IGMP timeout period.
B.Set the Ethernet multicast mode to Enabled， enable the IGMP snooping capability， and define the IGMP timeout period.
C.Set the multicast monitor function to Enabled， enable the IGMP snooping capability， and define the mandatory data rate to the minimum value supported.
D.Set the Ethernet multicast mode to Multicast and define the multicast group address.
A.Browse to the phone using the MAC address of the phone.
B.Use HTTPS:// preceding the address of the phone.
C.Change web access to read/write for the MAC address of the phone on Cisco Unified Communications Manager.
D.Enter the username and password of the phone.
E.Ensure that the host is on the same subnet as the remote phone.
A.EAP-TLS
B.EAP-TTLS
C.EAP-SIM
D.PEAPv1/EAP-GTC
E.LEAP
A.Avoid channels with high AP co-channel interference.
B.Use channels with high AP co-channel interference to avoid channel roams.
C.Set the 2.4-GHz data rate of 5.5 Mb/s to required.
D.Use 5-GHz channels when possible.
E.Use 2.4-GHz channels when possible.
A.11 Mb/s
B.18 Mb/s
C.24 Mb/s
D.54 Mb/s
A.grants a VoWLAN client-initiated call based on the number of active clients associated to the accesspoint
B.grants a VoWLAN client-initiated call based on channel bandwidth capacity
C.uses the 802.11i specification
D.uses 802.11 action frames
E.requires a WMM-enabled client
A.Cisco Unified Communications Manager
B.Cisco Spectrum Expert
C.Vocera Server to display the username of the Vocera badge
D.Polycom SpectraLink syslog server
E.Cisco WCS VoWLAN readiness tool
A.enable aggressive load balancing
B.enable coverage hole detection
C.disable dynamic transmit power control
D.enable short preamble
A.nominally 30 percent to best align with Cisco Unified Communications System recommendations
B.100 percent to ensure that the VoWLAN calls can use all the available bandwidth, if needed
C.system default of 75 percent
D.40 to 60 percent
E.voice CAC should be left disabled unless wired QoS is configured
A.configure WLAN setting to enable WMM
B.configure WLAN Aironet information elements enabled
C.configure global 802.11b/g or 802.11a，or both，voice CAC
D.configure WLAN QoS Platinum
E.configure DTIM = 2
最新試題
Which deployed VoWLAN client security option is recommended by Cisco?（）
Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a WMM-associated client frame that is H-REAP locally switched running v5.2?（）
When designing the coverage area for high call capacity, what two actions should be done with data rates and channels?（）
What is the bandwidth requirement of an active duplex wireless call using G.711 codec?（）
Which wireless LAN statistics are reported from the Cisco Unified Wireless IP Phone 7921G via a directly connected web browser?（）
Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）
What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?（）
What is the minimum configuration you must do in order to enable multicast support on the CiscoWireless LAN Controller v5.2?（）
What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?（）
Which keypad sequence will reset the Cisco Unified Wireless IP Phone 7921 to factory default?（）