A. You should place standard ACLS as close as possible to the source of traffic to be denied.
B. You should place extended ACLS as close as possible to the source of traffic to be denied.
C. You should place standard ACLS as close as possible to the destination of traffic to be denied.
D. You should place extended ACLS should be places as close as possible to the destination of traffic to be denied.
您可能感興趣的試卷
你可能感興趣的試題
A. RouterTK(config-line)# access-class 10 in
B. RouterTK(config-if)# ip access-class 23 out
C. RouterTK(config-line)# access-list 150 in
D. RouterTK(config-if)# ip access-list 128 out
E. RouterTK(config-line)# access-group 15 out
F. RouterTK(config-if)# ip access-group 110 in
Study the information and the relevant configuration file below for the Testking Branch router
What additional command must be executed on the Branch router before interesting traffic will initiate an ISDN call?（）
A. (config-if)# dialer-group 1
B. (config-if)# dialer-list 1
C. (config-if)# dialer map 1
D. (config-if)# dialer-route 1
The following access list below was applied outbound on the E0 interface connected to the 192.169.1.8/29 LAN:
How will the above access lists affect traffic?（）
A. FTP traffic from 192.169.1.22 will be denied.
B. No traffic, except for FTP traffic will be allowed to exit E0.
C. FTP traffic from 192.169.1.9 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.169.1.9/29 will be denied.
A.SMTP
B.DNS
C.FTP
D.Telnet
E.HTTP
F.POP3
A. Application of up to three access lists per protocol to a single interface.
B. No more than two access lists per interface.
C. One access list may be configured per direction for each Layer 3 protocol configured on an interface.
D. The maximum number allowed varies due to RAM availability in the router.
E. An infinite number of access lists that can be applied to an interface, from most specific to most general.
F. Cisco IOS allows only one access list to an interface.
You're the systems administrator at Testing, and you create the following access control lists.
You then enter the command "ip access-group 101 in" to apply access control list 101 to router TK1s e0 interface.Which of the following Telnet sessions will be blocked as a result of your access lists?（）
A. Telnet sessions from host A to host 5.1.1.10
B. Telnet sessions from host A to host 5.1.3.10
C. Telnet sessions from host B to host 5.1.2.10
D. Telnet sessions from host B to host 5.1.3.8
E. Telnet sessions from host C to host 5.1.3.10
F. Telnet sessions from host F to host 5.1.1.10
A. permit access-list 101 out
B. ip access-group 101 out
C. apply access-list 101 out
D. access-class 101 out
E. ip access-list e0 out
A. Provides local hosts with a default gateway address
B. Allows remote management of the switch.
C. Allows the switch to respond to ARP requests between two hosts
D. Ensures that hosts on the same LAN can communicate with each other.
A. TestKSwitch(config)# ip route-default 192.168.1.115
B. TestKSwitch(config)# ip default-gateway 192.168.1.115
C. TestKSwitch(config)# ip route 192.168.1.115 0.0.0.0
D. TestKSwitch(config)# ip default-network 192.168.1.115
A. Switch(config-if)# vlan all
B. Switch(config-if)# switchport trunk encapsulation dot1q
C. Switch(config-if)# switchport access vlan all
D. Switch(config-if)# switchport mode trunk
E. Switch(config-if)# switchport access vlan 303
最新試題
Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?（）
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.（）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）
What is the purpose of typing o/r 0x2142 during a password recover procedure on a 2500 series router?（）
A Class C network address has been subnetted with a /27 mask.Which of the following addresses is a broadcast address for one of the resulting subnets?（）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
What is a global command?（）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
Which of the following describe router functions?（）
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? （）