A. The command establishes a static route
B. The command invokes a dynamic routing protocol for 192.168.12.0
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1
D. Traffic for all networks is forwarded to 172.16.12.1
E. This route is automatically propagated throughout the entire network
F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network

A. It provides dynamic neighbor discovery
B. It detects unreachable neighbors in 90 second intervals
C. It maintains neighbor relationships
D. It negotiates correctness parameters between neighboring interfaces
E. It uses timers to elect the router witch the fastest links as the designated router
F. It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF

A.addresseschosenbyacompanytocommunicatewiththeInternet
B.addressesthatcannotberoutedthroughthepublicInternet
C.addressesthatcanberoutedthroughthepublicInternet
D.aschemetoconservepublicaddresses
E.addresseslicensedtoenterprisesorISPsbyanInternetregistryorganization

A. When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B. Each broadcast domain on a switch can have its own unique VTP domain
C. VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured.
D. When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation.
E. VTP pruning is used to increase available bandwidth in trunk links
F. Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords

A. show interfaces interface
B. show vlan bri
C. show interfaces interface switchport
D. show interface interface trunk
E. show interfaces vlan

A. any-to-many communication model
B. delivery of packets to the group interface that is closest to the sending device
C. one-to-many communication model
D. the same address for multiple devices in the group
E. one-to-nearest communication model
F. a unique IPV6 address for each device in the group

A.HMAC-MD5
B.RSA
C.HMAC-SHA-1
D.DH1
E.DH2

A.reduced cost
B.bette rthroughput
C.increased security
D.scalability
E.reduced latency
F.broadband incompatibility

A. EIGRP converges fast RIP because of DUAL and backup routes that are stored in the topology table.
B. EIGRP uses a hello protocol to establish neighbor relationships
C. EIGRP uses split horizon and reverse poisoning to avoid routing loops.
D. EIGRP uses periodic updates to exchange routing information
E. EIGRP allows routers of different manufacturers to interoperate
F. EIGRP supports VLSM and authentication for routing updates.
G. EIGRP use a broadcast address to send routing information.

A. CHAP uses a two-way handshake
B. CHAP authentication periodically occurs after link establishment
C. CHAP has no protection from playback attacks
D. CHAP authentication is performed only upon link establishment
E. CHAP uses a three-way handshake
F. CHAP authentication passwords are sent in plaintext