單項選擇題Which parameter or parameters are used to calculate OSPF cost in cisco routers?()

A.Bandwidth,Delay,and MTUB
B.andwidth
C.Bandwidth and MTU
D.Bandwidth,MTU,Reliability,Delay,and Load


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Which Cisco Catalyst feature automatically disables the port in an operational PortFast upon receipt of a BPDU?()

A.BackboneFast
B.UplinkFast
C.Root Guard
D.BPDU Guard
E.BPDU Filter

2.單項選擇題Host 1 receives a file from remote server 1. Which MAC address appears as the source address in the header of the frames received by Host 1()。

A.The MAC address of the NIC in Host 1
B.The MAC address of the NIC in server 1
C.The MAC address of the Fa0/0 interface of router R1
D.The MAC address of the s0/0/0 interface of the router R2

3.多項選擇題By default, each port in a Cisco Catalyst switch is assigned to VLAN1. Which two recommendations are key to avoid unauthorized management access? ()

A.Create an additional ACL to block the access to VLAN 1.
B.Move the management VLAN to something other than default.
C.Move all ports to another VLAN and deactivate the default VLAN.
D.Limit the access in the switch using port security configuration.
E.Use static VLAN in trunks and access ports to restrict connections.
F.Shutdown all unused ports in the Catalyst switch.

4.多項選擇題

Your boss is learning a CCNA training course,refer to the exhibit.The access list has been configured on the S0/0 interface of router RTB in the outbound direction.Which two packets,if routed to the interface,will be denied?()
access-list 101 denytcp192.168.15.320.0.0.15any eq telnet
access-list 101 permitip any any

A.source ip address:192.168.15.5;destination port: 21
B.source ip address:,192.168.15.37 destination port: 21
C.source ip address:,192.168.15.41 destination port: 21
D.source ip address:,192.168.15.36 destination port: 23
E.source ip address:192.168.15.46;destination port: 23
F.source ip address:,192.168.15.49 destination port: 23

5.多項選擇題Host 1 has just started up and requests a web page from web server 2. Which two statements describe steps in the process Host 1 uses to send the request to web server 2 (choose two)()。

A.Host 1 addresses the frames to the MAC address of router R1
B.Host 1 looks in its ARP cache for the MAC address of router R1
C.Host 1 addresses the frames to the MAC address of web server 2
D.Host 1 sends the packets to router R1 to be forwarded to web server 2
E.Host 1 sends a broadcast ARP request to obtain the MAC address of webserver2

7.多項選擇題Which two statements apply to dynamic access lists?()

A.they offer simpler management in large internetworks.
B.you can control logging messages.
C.they allow packets to be filtered based on upper-layer session information.
D.you can set a time-based security policy.
E.they provide a level of security against spoofing.
F.they are used to authenticate individual users

8.多項選擇題

Refer to the exhibit.Which two statements are true of the interfaces on switch1?()

A.A hub is connected directly to FastEthernet0/5
B.FastEthernet0/1 is configured as a trunk link.
C.FastEthernet0/5 has statically assigned mac address
D.Interface FastEthernet0/2 has been disable.
E.Multiple devices are connected directly to FastEthernet0/1.
F.FastEthernet0/1 is connected to a host with multiple network interface cards.

10.單項選擇題Which set of commands is recommended to prevent the use of a hub in the access layer?()

A.switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security maximum 1
B.switch(config-if)#switchport mode trunk switch(config-if)#switchport port-security mac-address 1
C.switch(config-if)#switchport mode access switch(config-if)#switchport port-security maximum 1
D.switch(config-if)#switchport mode access switch(config-if)#switchport port-security mac-address 1

最新試題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:?jiǎn)雾?xiàng)選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:?jiǎn)雾?xiàng)選擇題

傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:?jiǎn)雾?xiàng)選擇題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題