單項選擇題Which protocol is used by multicast to prevent loops?()

A.OSPF
B.RIP
C.RPF
D.BGP
E.EIGRP


您可能感興趣的試卷

你可能感興趣的試題

3.多項選擇題Which three statements are true about load-based Call Admission Control?()

A.grants a VoWLAN client-initiated call based on the number of active clients associated to the accesspoint
B.grants a VoWLAN client-initiated call based on channel bandwidth capacity
C.uses the 802.11i specification
D.uses 802.11 action frames
E.requires a WMM-enabled client

4.單項選擇題What is the minimum configuration you must do in order to enable multicast support on the CiscoWireless LAN Controller v5.2?()

A.Enable the IGMP snooping capability and define the IGMP timeout period.
B.Set the Ethernet multicast mode to Enabled, enable the IGMP snooping capability, and define the IGMP  timeout period.
C.Set the multicast monitor function to Enabled, enable the IGMP snooping capability, and define the  mandatory data rate to the minimum value supported.
D.Set the Ethernet multicast mode to Multicast and define the multicast group address.

5.單項選擇題What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?()

A.nominally 30 percent to best align with Cisco Unified Communications System recommendations
B.100 percent to ensure that the VoWLAN calls can use all the available bandwidth, if needed
C.system default of 75 percent
D.40 to 60 percent
E.voice CAC should be left disabled unless wired QoS is configured

6.單項選擇題Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a WMM-associated client frame that is H-REAP locally switched running v5.2?()

A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.
E.WLAN configured QoS level is used to set the wired DSCP priority.
F.Wired 802.1p CoS priority is not set.

7.多項選擇題Which three are benefits of U-APSD?()

A.synchronization of the transmission and reception of voice frames
B.bandwidth reservation
C.optimized power-save mode periods
D.increased call capacity
E.priority bandwidth and polling

8.多項選擇題Which two pieces of information does the Cisco WLC v5.2 client monitor feature provide about a VoWLAN client?()

A.RSSI of the client at the access point
B.WMM state
C.current MOS value
D.current RF channel
E.current transmit data rate

9.單項選擇題Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?()

A.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, and finally  to all wireless clients of that Cisco WLC, via wireless multicast.
B.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, and finally to  all wireless clients of that Cisco WLC, via wireless unicast.
C.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless multicast.
D.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless multicast.
E.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless unicast.
F.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless unicast.

10.單項選擇題Which configuration should be done in order to improve the performance of the Cisco Unified Wireless IP Phone 7921G in a WLAN infrastructure?()

A.enable aggressive load balancing
B.enable coverage hole detection
C.disable dynamic transmit power control
D.enable short preamble

最新試題

What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?()

題型:單項選擇題

What is the recommended Cisco DSCP value for a switch or router passing Cisco Unified Wireless IP Phone 7921G RTP packets?()

題型:單項選擇題

What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?()

題型:單項選擇題

Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a WMM-associated client frame that is H-REAP locally switched running v5.2?()

題型:單項選擇題

When designing the coverage area for high call capacity, what two actions should be done with data rates and channels?()

題型:多項選擇題

Which three are interframe spaces defined in 802.11?()

題型:多項選擇題

Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?()

題型:多項選擇題

What call performance statistics are reported on the Cisco Wireless IP Phone 7921 user interface?()

題型:單項選擇題

Which three solutions does AirMagnet VoFi Pro Analyzer integrate?()

題型:多項選擇題

What will improve the battery life of a Cisco Unified Wireless IP Phone 7921G?()

題型:單項選擇題