A.show ip route ∣ to tftp：//192.168.1.1/route.txt
B.show ip route ∣ tee tftp：//192.168.1.1/route.txt
C.show ip route ∣ include tftp：//192.168.1.1/route.txt
D.show ip route ft include tJtp：//19Z168.1.1/route.txt
E.show ip route ∣ redirect tftp：//192.168.1.1/route.txt
您可能感興趣的試卷
你可能感興趣的試題
A.Link-local address used for next-hop addresses
B.Interface can be added to RIP routing process in either interface configuration mode or in routerconfiguration mode
C.Uses a multicast to send routing updates
D.Use hop count as a metric
E.Distance-vector routing protocol
F.Maximum hop count is 15 with 16 being "unreachable"
A.The default-metric command configured under the appropriate interface
B.The metric parameter in the network command of a routing process
C.The metric parameter in the redistribute command
D.The default-metric command
E.A route-map containing a seed command
F.A route map containing a metric command
A.Designated port
B.Nonswitch port
C.Switch port
D.Nonroot port
E.Nondesignated port
F.Root port
A.show ip eigrp topology
B.show ip eigrp adjacency
C.show ip eigrp routes
D.show ip eigrp database
E.show ip route eigrp
F.show ip eigrp forwarding
A.255.255.255.255
B.224.0.0.6
C.FFFF：FFFF：FFFF：FFFF：FFFF：FFFF：FFF：FFF
D.FF02：：10
E.224.0.0.10
F.FF02：：5
A.Rl（config-if）#ipv6 default-information originate
B.Rl（config-router）#ipv6 rip 〈process-name〉 default-information only
C.Rl（config）#ipv6 route ：：/0 null 0
D.Rl（config-if）#ipv6 rip 〈process-name〉 default-information only
E.Rl（config-router）#ipv6 rip route ；：/0 originate
F.Rl（config-router）#aggregate-address ：：/0 summarize-routes
A.Ping 10.1.1.1 Data Pattern M
B.Ping 10.1.1.1 timeout 0
C.Ping 10.1.1.1 size 1500 df-bit
D.Ping 10.1.1.1 source loopback 0
E.Ping 10.1.1.1 size 1500
F.Ping 10.1.1.1 size 1500 Strict
A.RIP route 10.1.2.0/24
B.EIGRP route 10.1.2.0/24
C.RIP route 10.1.0.0/16
D.OSPF route 10.1.0.0/16
E.RIP route 10.0.0.0/16
F.OSPF route 10.1.2.0/24
A.OSPF topology table
B.OSPF interface table
C.OSPF routing information base
D.OSPF link-state database
E.OSPF adjacency table
F.OSPF neighbor table
A.Problem report
B.Problem collaboration
C.Problem diagnosis
D.Problem resolution
E.Problem documentation
F.Probiem authentication
最新試題
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Which statement about PPPoA configuration is correct？（）
As a network engineer， do you know for what purpose SDM uses Security Device Event Exchange（SDEE）？（）
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Drag the DSL local loop topic on the left to the correct descriptions on the right.
Which three statements accurately describe IOS Firewall configurations？（）
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）