A.Combine all the VLAN spanning trees into a single spanning tree
B.Set forward delay and max-age timers to the maximum possible values
C.None of the choices
D.Change the router VTP server mode
E.Disable the root bridge
您可能感興趣的試卷
你可能感興趣的試題
Exhibit
SW1#show spanning-tree vlan 200
VLAN200
Spanning tree enabled protocol iee
eRoot ID Priority 32968
Address 000c.ce29.ef00
Cost 19
Port 2 （FastEthernet0/2）
Hello time 10 Sec Max Age 20 sec Forward Delay 30 sec
Bridge ID Priority 32968 （priority 32768 sys-id-ext 200）
Address 000c.ce2a.4180
Hello Time 2 sec Max Age 20 Sec Forward Delay 15 sec
Interface Role Sts Cost PrioNbr Type
Fa0/2 Root FWD 19 128.2 P2p
Fa0/3 Altn BLK 19 128.3 P2p
Based on the show spanning-tree vlan 200 output shown in the exhibit， which two statementsabout the STP process for VLAN 200 are true？（）
A.BDPUs will be sent out every two seconds
B.The time spent in the listening state will be 30 seconds
C.The time spent in the learning state will be 15 seconds
D.The maximum length of time that the BPDU information will be saved is 30 seconds
E.This switch is the root bridge for VLAN 200
F.BPDUs will be sent out every 10 seconds
A.hello timer
B.BPDU timer
C.Forward_delay timer
D.Max_age timer
E.Dead timer
F.Wait timer
Given the above diagram and assuming that STP is enabled on all switch devices， which twostatements are true？（）
A.DSW11willbe elected the root bridge
B.DSW12 will be elected the root bridge
C.ASW13 will be elected the root bridge
D.P3/1 will be elected the nondesignated port
E.P2/2 will be elected the nondesignated port
F.P3/2 will be elected the nondesignated port
Exhibit：
Assuming that VLAN 1 and VLAN 2 traffic is enabled on the above network， what effect will thefollowing command have when entered on port 0/2 on switch SWA？（）
spanning-tree vlan 1 port-priority 16
A.VLAN 1 traffic will be blocked on Switch SWB port 1/1
B.VLAN 2 traffic will be blocked on Switch SWB port 1/1
C.VLAN 2 traffic will be blocked on Switch SWA port 0/2
D.VLAN 1 and 2 traffic will be blocked on Switch SWA port 0/1
E.VLAN 1 and 2 traffic will be blocked on Switch SWA port 0/2
Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivitythroughout the network， Front Line users have been complaining that they experience slowernetwork performance when accessing the server farm than the Reception office experiences.Based on the exhibit， which two statements are true？（）
A.Disabling the Spanning Tree Protocol would improve network performance
B.Changing the bridge priority of S1 to 36864 would improve network performance
C.Changing the bridge priority of S1 to 4096 would improve network performance
D.Changing the bridge priority of S3 to 4096 would improve network performance
E.Upgrading the link between S2 and S3 to Gigabit Ethernet would improve performance
F.Changing the bridge priority of S2 to 36864 would improve network performance
The switched LAN is displayed below：
In this network， STP has been implemented. Switch SW1 is the root switch for the default VLAN.To reduce the broadcast domain， the network administrator decides to split users on the networkinto VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 rootprimary on switch SW1. What will happen as a result of this change？（）
A.Switch SW1 will change its spanning tree priority to become root for VLAN 2 only
B.All ports of the root switch SW1 will remain in forwarding mode throughout the reconvergenceof the spanning tree domain
C.No other switch in the network will be able to become root as long as switch SW1 is up andrunning
D.Switch SW1 will remain root for the default VLAN and will become root for VLAN 2
E.None of the other alternatives apply
The switched LAN is shown below：
Study the exhibit above carefully. Switch SW5 is configured as the root switch for VLAN 10 but notfor VLAN 20. If the STP configuration is correct， what will be true about Switch SW5？（）
A.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in standbymode
B.All ports will be in forwarding mode
C.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in blockingmode
D.All ports in VLAN 10 will be in forwarding mode
E.None of the other alternatives apply
A.IEEE 802.10
B.Misconfigured NIC
C.User configuration
D.IEEE 802.1Q
E.None of the other alternatives apply
最新試題
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Router NetworkTut is configured as shown below：Given the above configuration， which statement is true？（）
Which three statements accurately describe IOS Firewall configurations？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
cisco ios command to interface dialer 0
Drag and drop each management protocol on the above to the correct category on the below.
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
Which statement correctly describes IPsec VPN backup technology？（）