A.The cypto isakmp keepalive command is used to configure the Stateful Switchover （SSO）protocol
B.Reverse Route Injection （RRI） is configured on at the remote site to inject the central sitenetworks
C.Each Hot Standby Routing Protocol （HSRP） standby group has two well-known MACaddresses and a virtual IP address
D.The cypto isakmp keepalive command is used to configure stateless failover
您可能感興趣的試卷
你可能感興趣的試題
A.The crypto ACL number
B.The IPSEC mode （tunnel or transport）
C.The GRE tunnel interface IP address
D.The GRE tunnel source interface or IP address， and tunnel destination IP address
E.The MTU size of the GRE tunnel interface
Refer to the exhibit. Which two statements about the AAA configuration are true？（）
A.A good security practice is to havethe none parameter configured as the final method used toensure that no other authentication method will be used
B.If a TACACS+ server is not available， then a user connecting via the console port would not beable to gain access since no other authentication method has been defined
C.If a TACACS+ server is not available， then the user Bob could be able to enter privileged modeas long as the proper enable password is entered
D.Theaaa new-model command forces the router to override every other authentication methodpreviously configured for the router lines
E.To increase security， group radius should be used instead of group tacacs+
F.Two authentication options are prescribed by the displayedaaa authentication command
A.If the radius server returns an error， the enable password will be used
B.If the radius server returns a ’failed’ message， the enable password will be used
C.The command login authentication group will associate the AM authentication to a specifiedinterface
D.If the group database is unavailable， the radius server will be used
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
A.The LIST1 list will disable authentication on the console port
B.All login requests will be authenticated using the group tacacs+ method
C.The default login authentication will automatically be applied to all login connections
D.Because no method list is specified， the LIST1 list will not authenticate anyone on the consoleport
A.to provide a keepalive mechanism
B.to pull event logs from the router
C.to extract relevant SNMP information
D.to perform application-level accounting
A.Disable post scan
B.Use SSH or SSL
C.Enable trust levels
D.Deny echo replies on all edge routers
Network Topology Exhibit：
Configuration Exhibit：
NET（config）# access-list 112 deny icmp any any echo log
NET（config）# access-list 112 deny imp any any redirect log
NET（config）# access-list 112 deny icmp any any mask-request log
NET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255
NET（config）# interface Fa0/1
NET（config-if）# ip access-group 112 in
You work as a network administrator at networkTut.com， study the exhibit carefully. The
configuration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
A.The first three statements of ACL 112 should have permitted the ICMP traffic and the laststatement should deny the identified traffic
B.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.2.1.00.0.0.255"
C.The last statement of ACL 112 should have been "access-list 112permit icmp any 10.2.1.00.0.0.255"
D.ACL 112 should have been applied to interface Fa0/0 in an inbound direction
E.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.1.1.00.0.0.255"
F.ACL 112 should have been applied to interface Fa0/1 in an outbound direction
G.None of the above
A.The dsl operating-mode auto command is required if the default mode has been changed
B.The ip mtu 1496 command must be applied on the dialer interface
C.The encapsulation ppp command is required
D.The ip mtu 1492 command must be applied on the dialer interface
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
A.On the Dialer0 interface， add the pppoe enable command
B.On the Dialer0 Interface， add the ip mtu 1496 command
C.On the ATM0/0 interface， add the dialer pool-member 1 command
D.On the ATM0/0 interface， add the dialer pool-member 0 command
Router NetworkTut is configured as shown below：
Given the above configuration， which statement is true？（）
A.This device is configured as a PPPoE client
B.This device is configured as a PPPoA client
C.This device is configured as RFC 1483/2684bridge
D.This device is configured an an aggregation router
最新試題
Drag the DSL local loop topic on the left to the correct descriptions on the right.
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）
Which three statements accurately describe IOS Firewall configurations？（）
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）