Refer to the output shown on switch SW1 below：
VLAN 1 bridge priority set to 8192.
VLAN 1 bridge max aging time set to 20.VLAN 1 bridge hello time set to 2.
VLAN 1 bridge forward delay set to 15.
Switch is now the root switch for active VLAN 1.
What command would you enter to reproduce this output？
您可能感興趣的試卷
你可能感興趣的試題
Exhibit：
Assuming that VLAN 1 and VLAN 2 traffic is enabled on the above network， what effect will thefollowing command have when entered on port 0/2 on switch SWA？（）
spanning-tree vlan 1 port-priority 16
A.VLAN 1 traffic will be blocked on Switch SWB port 1/1
B.VLAN 2 traffic will be blocked on Switch SWB port 1/1
C.VLAN 2 traffic will be blocked on Switch SWA port 0/2
D.VLAN 1 and 2 traffic will be blocked on Switch SWA port 0/1
E.VLAN 1 and 2 traffic will be blocked on Switch SWA port 0/2
Refer to the exhibit. All network links are FastEthernet. Although there is complete connectivitythroughout the network， Front Line users have been complaining that they experience slowernetwork performance when accessing the server farm than the Reception office experiences.Based on the exhibit， which two statements are true？（）
A.Disabling the Spanning Tree Protocol would improve network performance
B.Changing the bridge priority of S1 to 36864 would improve network performance
C.Changing the bridge priority of S1 to 4096 would improve network performance
D.Changing the bridge priority of S3 to 4096 would improve network performance
E.Upgrading the link between S2 and S3 to Gigabit Ethernet would improve performance
F.Changing the bridge priority of S2 to 36864 would improve network performance
The switched LAN is displayed below：
In this network， STP has been implemented. Switch SW1 is the root switch for the default VLAN.To reduce the broadcast domain， the network administrator decides to split users on the networkinto VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 rootprimary on switch SW1. What will happen as a result of this change？（）
A.Switch SW1 will change its spanning tree priority to become root for VLAN 2 only
B.All ports of the root switch SW1 will remain in forwarding mode throughout the reconvergenceof the spanning tree domain
C.No other switch in the network will be able to become root as long as switch SW1 is up andrunning
D.Switch SW1 will remain root for the default VLAN and will become root for VLAN 2
E.None of the other alternatives apply
The switched LAN is shown below：
Study the exhibit above carefully. Switch SW5 is configured as the root switch for VLAN 10 but notfor VLAN 20. If the STP configuration is correct， what will be true about Switch SW5？（）
A.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in standbymode
B.All ports will be in forwarding mode
C.All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in blockingmode
D.All ports in VLAN 10 will be in forwarding mode
E.None of the other alternatives apply
A.IEEE 802.10
B.Misconfigured NIC
C.User configuration
D.IEEE 802.1Q
E.None of the other alternatives apply
A VTP domain has six active VLANs. Without notice， all VLANs except VLAN1 fail. Just prior tothe failure， Switch2 was added to the network.
Which three issues on Switch2 could be the cause？（）
A.Switch2 is configured for only VLAN1
B.Switch2 is a VTP server in a different domain
C.Switch2 is a VTP server in the Company domain
D.Switch2 is not a VTP domain.
E.Switch2 has a lower VTP configuration revision number than the current VTP revision
F.Switch2 has a higher VTP configuration revision number than the current VTP revision
A.Physical management of the switch
B.Logical management of the switch
C.In-band management of the switch
D.Out-of-band management of the switch
A.Reload the active VLAN configuration
B.Clear the affected port and bring it up again
C.Explicitly set the trunk for the VLAN to be on
D.Remove all the VLANs set
A.The link is using IEEE 802.1Q protocol
B.The link is using IEEE 802.1E protocol
C.Spanning tree is disabled
D.Not enough information to determine
E.The native VLAN information is identical at each end of the link
F.The native VLAN information is different at each end of the link
A.IEEE 802.1Q
B.IEEE 802.10
C.Misconfigured NIC
D.User configuration
E.All of the above
最新試題
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
Refer to the exhibit. Which two statements about the AAA configuration are true？（）
Which statement correctly describes IPsec VPN backup technology？（）
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）