A.Sent by the destination
B.Received by the sender
C.Received by the destination
D.Sent by the sender
您可能感興趣的試卷
你可能感興趣的試題
A.Only UplinkFast and BackboneFast are specified in 802.1w; PortFast must be manually configured.
B.Only PortFast is specified in 802.1w; UplinkFast and BackboneFast must be manually configured.
C.None of the proprietary Cisco enhancements are specified in 802.1w.
D.PortFast, UplinkFast, and BackboneFast are specified in 802.1w.
A.Speed mismatch
B.Incorrect encapsulation
C.MTU set too low
D.Duplex mismatch
A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering, with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.
A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.
A.Reverse Path Forwarding
B.Hardware-based forwarding
C.UDP forwarding
D.Layer 2 Forwarding
A.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode ON
B.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode to OFF
C.The firewall does not support Cisco Discovery Protocol. You should set the switchport trunk mode asauto.
D.The firewall does not support DTP. You should set the switchport trunk mode to ON
A.0.0.0.1
B.0.255.0.1
C.2001:DB8::1
D.2001:DB8:ABCD:FEEF::1
A.excessive collisions
B.FCS errors
C.runts
D.late collisions
A.BPDUs that enter a blocking port are discarded.
B.BPDUs that enter a blocking port are processed.
C.Loopguard puts an interface into a loop-inconsistent state when BPDUs stop being received on a blocking port.
D.BPDUs are only processed on forwarding ports.
A.The CBWFQ scheduler provides a guaranteed minimum amount of bandwidth to each class.
B.CBWFQ services each class queue using a strict priority scheduler.
C.The class-default queue only supports WFQ.
D.Inside a class queue, processing is always FIFO, except for the class-default queue.
最新試題
Which one of the following potential issues is eliminated by using split horizon?()
In GLBP, which router will answer on client ARP requests?()
For the following ports, which port is on every bridge in a Spanning Tree Protocol IEEE 802.1w network except the root bridge?()
Which statement is true of a source that wants to transmit multicast traffic to group 239.1.1.1?()
Which three protocols should be explicitly managed by using Control Plane Policing on an Internet border router?()
Which two attributes need to match for two switches to become members of the same MST region? ()
What are the "bound IP addresses" used for in LDP?()
For the following protocols, which one provides a mechanism to transparently intercept and redirect CIFS traffic from a client to a local Cisco Wida Area Application engine?()
Multicast is being deployed in the network, and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast, the network monitoring tools show periodic spikes in link utilization throughout the network, even in areas where the video application is not being used. What could be a possible cause?()
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message (knowing that the MSDP router is also configured as an RP for the PIM domain)?()