A.PIM sparse mode is being used.
B.PIM dense mode is being used.
C.The BGP multicast address family has not been configured.
D.IGMP version 3 is being used.
E.IP PIM neighbor filters have not been applied.
您可能感興趣的試卷
你可能感興趣的試題
A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.
A.routing issue
B.denial-of-service attack
C.MAC flooding
D.spanning-tree recalculation
E.Layer 2 loop
F.ARP spoofing attack
A.LDAP
B.ICMP
C.RTP
D.BGP
E.SSH
F.RDP
A.qos-group
B.DSCP
C.LFI
D.NBAR
A.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
B.A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
C.A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
D.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
E.A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
A.Both RTA and RTB will do LSA7/5 translation，since they are both NSSA ABRs
B.RTA will do LSA7/5 translation，since it has the lower router ID
C.RTB will do LSA7/5 translation，since it has the higher router ID
D.The redistributing router will do LSA7/5 translation，since it is within the NSSA
A.It enables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
B.It disables provider edge （PE） specific checks on a router when the OSPF process is associated with the VRF
C.It enables the exchange of the "VRF-Lite" capability when the OSPF adjacency is formed.
D.It disables the MPLS processing on the OSPF learned routes inside the VRF
A.OSPF external LSAs are automatically flooded into all OSPF areas, unlike type 7 LSAs, which require that redistribution be configured.
B.External LSAs (type 5) are automatically changed to type 1 LSAs at ASBRs.
C.Type 5 LSAs are route summaries describing routes to networks outside the OSPF Autonomous System.
D.External network LSAs (type 5) redistributed from other routing protocols into OSPF are not permitted to flood into a stub area
A.Before sending traffic, it must first join multicast group 239.1.1.1 by sending an IGMPv2 membership report to the default router on the local subnet.
B.It must send an IGMPv2 Request to Send packet and then wait for an IGMPv2 Clear to Send packet from the IGMPv2 querier router on the local subnet
C.It may begin transmitting multicast traffic to the group only when there is no other host transmitting to the group on the local subnet.
D.It may transmit multicast traffic to the group at any time.
A.00000
B.12345
C.23456
D.65000
E.99999
最新試題
IEEE 802.1w is a Rapid Spanning Tree Protocol （RSTP） that can be seen as an evolution of the 802.1 standard. What are the port roles described by 802.1w？（）
Which QoS mechanism can help classify different kinds of Citrix traffic （print job versus real-time terminal control）？（）
Choose two commands that are required to enable multicast on a router， when it is known that the receivers use a specific functionality of IGMPv3.（）
You are the network administrator of a Layer 3 switched network. Users in one VLAN are complaining that access to the server VLAN is very slow from time to time. Traffic in the local VLAN works without any issue， and users in other VLANs do not have any complaint to reach the server VLAN. What is most likely the cause of this issue？（）
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured， which parameter determines the winner？（）
Two directly connected routers， R1 and R2， are both configured for OSPF graceful restart. R2 is able to switch packets in hardware， but R1 is not. If a network administrator logs on to R2 and performs a system reload， which will be the result？（）
Which statement best describes OSPF external LSAs （type 5）？（）
Which three statements are true about policing？ （）
Phase I and Phase II DMVPN differ in terms of which of these characteristics？（）
What are the "bound IP addresses" used for in LDP？（）