A.ip sla 1 icmp-echo 1.1.1.1 tos 160
B.ip sla 1 icmp-echo 1.1.1.1 tos 20
C.ip sla 1 icmp-echo 1.1.1.1 precedence 5
D.ip sla 1 icmp-echo 1.1.1.1 dscp 20
您可能感興趣的試卷
你可能感興趣的試題
A.The phones are not sending traffic with the correct DSCP value.
B.The Cisco CallManager is not marking the traffic correctly.
C.This is most likely a bug on the CE routers.
D.Your LAN QoS is incorrectly configured.
A.routing issue
B.denial-of-service attack
C.MAC flooding
D.spanning-tree recalculation
E.Layer 2 loop
F.ARP spoofing attack
A. The switches are not the same model
B. You are not using the correct SFP
C. You are not using correct optical media converters
D. Configuration should be modified， because the distance is longer
A. Tunnel IPv6 over IPv4 to connect far-end IPv6 networks
B. Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is not possible
C. Explain why configuring IPv4 and IPv6 at the same time over the same LAN interface is possible
D. What is the meaning of EUI-64 and how does it work？
E. Tunnel IPv4 over IPv6 to connect far-end IPv4 networks.
A.NTP updates are sent in the timezone they are collected in，and the syslog server will adjust based on the input time.
B.NTP authentication verifies the source，not the recipient.
C.NTP authentication requires that the recipient has multiple strata clocks to ensure accuracy.
D.Secure NTP can be configured to use SHA-1 hashing，since NTP is very insecure.
E.A stratum 0 clock should be configured at the core of every network，so it can connect to an accuratetime source.
Refer to the exhibit. You are setting up a 2-gigabit EtherChannel. Following IEEE standards， the exhibit shows your configuration in a local switch1. However， EtherChannel is not coming up. Which one of these statements could be a possible reason？（）
A. EtherChannel is only available in Cisco equipment.
B. The customer side is supposed to be running PAgP, which is a Cisco standard.
C. PAgP is not an IEEE standard. VRRP should be used.
D. The configuration on switch1 needs to be modified to use LACP.
A.LDAP
B.ICMP
C.RTP
D.BGP
E.SSH
F.RDP
A.When congestion is present，the priority command doesn’t allow exceeding the allocated rate
B.When congestion isn’t present，the priority command doesn’t allow exceeding the allocated rate
C.When congestion is present，the priority command allows exceeding the allocated rate
D.When congestion isn’t present，the priority command allows exceeding the allocated rate
A.qos-group
B.DSCP
C.LFI
D.NBAR
Refer to the exhibit. Router E learned about the PIM RP （designated as 7.7.7.7） from four different sources. Routers A and D advertised the 7.0.0.0 network via EIGRP. Routers B and C advertised the 7.0.0.0 network via OSPF. Considering that all four Ethernet interfaces on router E could potentially lead back to the PIM-RP， when router E receives the first multicast packet down the shared tree， which incoming interface will be used to successfully pass the RPF check？（）
A. E0
B. E1
C. E2
D. E3
E. None of these interfaces will be used to successfully pass the RPF check.
F. All of these interfaces would successfully pass the RPF check.
最新試題
What is the command to configure RSVP to reserve up to one-tenth of a Gigabit link，but only allow eachindividual flow to use 1 MB/s？（）
Which protocol and port have been assigned by IANA for RADIUS authentication？（）
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）
Which three message types are valid PIMv2 message types？（）
Based on the output provided in the exhibit， to which address or location will the router forward a packet sent to 192.168.32.1？（）
Which two are differences between IGMPv2 and IGMPv3 reports？（）
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message knowing that the MSDP router is also configured as an RP for the PIM domain？（）
Which of the following is true about the MPLS header and its EXP field size？（）
Based on the exhibit presented. What will be the objective of this route map when applied to traffic passing through a router？（）
Which three options are valid ways to filter routes from a BGP peer？（）