Refer to the exhibit. How would you get the 1.1.1.1 network into the OSPF database？ （）
A. Configure RTA as an ASBR
B. Redistribute connected routes on RTA into OSPF
C. Set up a virtual link between area 1 and area 0
D. Set up a virtual link between area 1 and area 2
E. Add a static route into RTB and enter it into OSPF
F. Place a network 1.1.1.0 0.0.0.0 command into RTB
G. Set up a unique router ID on RTA using an RFC 1918 address
H. Change area 0 on RTB to area 1
您可能感興趣的試卷
你可能感興趣的試題
A.disable Zone-Based Firewall as the two features are not compatible
B.disable Cisco Express Forwarding as the two features are not compatible
C.generate a certificate and export on Cisco.com to receive a signature update
D.import the public RSA key from the Cisco IPS team that allows the router to verify that a signatureupdate （which was signed by this key） comes from Cisco
A. Add the command： router eigrp 1 traffic-share voice interface fast 0/0
B. Reconfigure EIGRP to recognize voice packets
C. Remove the variance from the configuration
D. Reconfigure the VoIP system to use RTP sequence number headers
E. Use an H '323 gatekeeper for your VoIP system to negotiate an H'245 uneven packet buffer
F. Reconfigure EIGRP to version 2
A.show ip pim rendez-vous
B.show ip rpf rp mapping
C.show ip pim rp mapping
D.show ip pim rp info
E.show ip pim
A.it enables PIM BSR
B.it makes the router an Auto-RP mapping agent
C.it advertises the router as an RP with Auto-RP
D.it makes the router an Auto-RP client
A.It will send the join only to the neighbor with the highest IP address.
B.It will send the join only to the neighbor with the lowest IP address.
C.It will send the join in a round-robin fashion across all neighbors.
D.It will send the join to all neighbors.
A.2001：db8：3811：：1
B.2001：db8：3811：：2323
C.2001：db8：3811：：0130
D.2001：db8：3811：：3
E.2001：db8：3811：：6
A.Flooding paths and redundancy
B.Amount of routing information in the OSPF area or routing domain
C.Number of routers with Cisco Express Forwarding enabled
D.Number of neighbor adjacencies
E.Other routing protocols in use
F.OSPF timer reconstruction negotiation
G.Redistribution with BGP neighbors
H.Redistribution with other IGP routing protocols， such as RIP or EIGRP
A. BGP peers must be Layer 2-adjacent
B. EBGP multihop is not configured
C. The firewall is not configured to allow IP protocol 89
D. The firewall is not configured to allow UDP 179.
Refer to the exhibit. Users on the 199.155.24.0 network are unable to reach the 172.16.10.0 network. What is the most likely solution？（）
A. Router ISP1 should be configured to peer with router B
B. Router ISP2 should be configured with no synchronization
C. Router ISP1 should be configured with no synchronization
D. Router ISP2 should be configured with no auto-summary.
E. Router ISP1 or IPS2 should be configured with network 176.16.10.0 mask 255.255.255.0
A.It relies on IPv6 to do the fragmenting.
B.It splits the LS Update packet into smaller packets.
C.It splits the LSA into smaller router LSA packets.
D.It produces an error.
最新試題
Based on the exhibit presented. What will be the objective of this route map when applied to traffic passing through a router？（）
Which of these best describes the actions taken when a VTP message is received on a switch configuredwith the VTP mode "transparent"？（）
Which protocol and port have been assigned by IANA for RADIUS authentication？（）
An expanding company is deploying leased lines between its main site and two remote sites. Thebandwidth of the leased lines is 128kb/s each，terminated on different serial interfaces on the main router.These links are used for combined VOIP and data traffic. The network administrator has implemented a VOIP solution to reduce costs，and has therefore reserved sufficient bandwidth in a low latency queue oneach interface for the VOIP traffic. Users now complain about bad voice quality although no drops areobserved in the low latency queue. What action will likely fix this problem？（）
Which multicast address is reserved for cisco-rp-discovery？（）
When STP UplinkFast is enabled on a switch utilizing the default bridge priority， what will the new bridgepriority be changed to？（）
Which of the following is true about the MPLS header and its EXP field size？（）
In order to configure two routers as anycast RPs， which of these requirements， af a minimum， must besatisfied？（）
Which two EIGRP options will limit a query domain？（）
In PIM-SM what control plane signaling must a multicast source perform before it begins to send multicasttraffic to a group？（）