A.show ip access-list
B.show access-list
C.list ip interface
D.show interface
E.show ip interface
您可能感興趣的試卷
你可能感興趣的試題
如圖,如果所有的鏈接都運行在相同的帶寬,哪些端口會被STP指定的端口?()
A. Switch A - Fa0/0
B. Switch A - Fa0/1
C. Switch B - Fa0/0
D. Switch B - Fa0/1
E. Switch C - Fa0/0
F. Switch C - Fa0/1
A.the switch with the lowest MAC address
B.the switch with the higest MAC address
C.the switch witch the higest IP address
D.the switch with the lowest IP address
A.to provide a mechanism to dynamically assign vlan membership to switch ports
B.to allow traffic to be carried from multiple vlans over a single link between switches
C.to allow native vlan information to be carried over a trunk link
D.to provide a mechanism to manually assign vlan membership to switch ports
E.to allow for managing the additions,deletions,and changes of vlans between switchs
A.它是一個2層的消息協議,它保證通過網絡的VLAN配置
B.它包括一個8比特字段指定的幀的優先級
C.它是專門用于標記的VLAN幀和下交換網絡拓?fù)浣Y(jié)構的變化劑量不能滿足網絡的重新收斂
D.它修改802.3幀報頭,并且因此需要在FCS重新計算
E.它是一種能夠攜帶未標記的幀的中繼協議
A.any-to-many communication model
B.delivery of packets to the group interface that is closest to the sending device
C.one-to-many communication model
D.the same address for multiple devices in the group
E.one-to-nearest communication model
F.a unique IPV6 address for each device in the group
A.10.188.31.0/27
B.10.188.31.0/26
C.10.188.31.0/29
D.10.188.31.0/28
E.10.188.31.0/25
A.當從一個802.1Q中繼收到一個包時,VLAN ID可以從源MAC地址表確定
B.未知單播幀被重新傳輸只對屬于同一VLAN的端口
C.交換機之間的端口應該在接入模式被配置為使得VLAN可以橫跨端口跨越
D.廣播和多播幀被重發到在不同的VLAN配置的端口
如下圖,對于圖中拓?fù)渲衯lan之間路由,那兩個選項是正確的?()
A.主機E和主機F使用相同的IP網關地址
B.Router1和交換機2應通過交叉線進行連接
C.Router1上不會在主機A和主機D之間的通信中發揮作用
D.在Router1在f0/0接口必須與子接口進行配置
E.Router1上需要更多的LAN接口,以適應顯示在展示的VLAN
F.在Router1和交換機2的trunk端口f0/0接口必須使用相同的封裝類型進行配置
A.service timestamps debug datetime msec
B.show clock detail
C.clock calendar-valid
D.service timestamps log datetime msec
A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005
最新試題
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
OSI 模型的哪兩項功能在第2層實現?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()