A.Configure the switch to be in VTP client mode.
B.Configure the switch to be in VTP domaint mode.
C.Configure the switch to be in VTP transparent mode.
D.Configure the switch to be in VTPv2.

A.source address and subnet mask
B.destination address and wildcard mask
C.source address and wildcard mask
D.destination address and subnet mask

A. VTP
B. 802.1q
C. IGP
D. ISL
E. 802.3u

A.HMAC-MD5
B.RSA
C.HMAC-SHA-1
D.DH1
E.DH2

A.Router（config）#router ospf 1
B.Router（config）#router ospf 0
C.Router（config）#router ospf area 0
D.Router（config-router）#network 192.168.16.0 0.0.0.255 area 0
E.Router（config-router）#network 192.168.16.0 0.0.0.255 0
F.Router（config-router）#network 192.168.16.0 255.255.255.0 area 0

A.廣播幀不會發送到swiches。
B.廣播地址，使用不正確的格式轉換表。
C.廣播地址永遠不會是一個幀的源地址。
D.廣播只使用網絡層地址。
E.廣播幀永遠不會被交換機轉發。

A.路由環路，抑制計時器
B.交換回路，水平分割
C.路由環路，水平分割
D.交換回路，VTP
E.路由環路，STP
F.交換回路，STP

A.reduced cost
B.better throughput
C.increased security
D.scalability
E.reduced latency
F.broadband incompatibility

A.defines the source IP address that is used in all broadcast packets on DLCI 202
B.defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
C.defines the destination IP address that is used in all broadcast packets on DLCI 202
D.defines the DLCI on which packets from the 192.168.1.2 IP address are received

A.接入鏈路需要在多個VLAN進行配置。
B.中的交換機之間的鏈路被配置在錯誤的VLAN中。
C.交換機之間的鏈路需要配置為trunk模式。
D.VTP沒有被配置為攜帶交換機之間VLAN信息。
E.交換機IP地址必須按順序配置為流量交換機之間轉發。