A.HMAC-MD5
B.RSA
C.HMAC-SHA-1
D.DH1
E.DH2
您可能感興趣的試卷
你可能感興趣的試題
A.Router(config)#router ospf 1
B.Router(config)#router ospf 0
C.Router(config)#router ospf area 0
D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
E.Router(config-router)#network 192.168.16.0 0.0.0.255 0
F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
A.廣播幀不會發送到swiches。
B.廣播地址,使用不正確的格式轉換表。
C.廣播地址永遠不會是一個幀的源地址。
D.廣播只使用網絡層地址。
E.廣播幀永遠不會被交換機轉發。
圖上面反映了什么問題,配置什么可以防止這種問題?()
A.路由環路,抑制計時器
B.交換回路,水平分割
C.路由環路,水平分割
D.交換回路,VTP
E.路由環路,STP
F.交換回路,STP
A.reduced cost
B.better throughput
C.increased security
D.scalability
E.reduced latency
F.broadband incompatibility
A.defines the source IP address that is used in all broadcast packets on DLCI 202
B.defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address
C.defines the destination IP address that is used in all broadcast packets on DLCI 202
D.defines the DLCI on which packets from the 192.168.1.2 IP address are received
所有交換機端口被分配到正確的VLAN,但SA和SB之間不能夠進行通信。根據顯示的輸出,什么是最可能出現的問題?()
A.接入鏈路需要在多個VLAN進行配置。
B.中的交換機之間的鏈路被配置在錯誤的VLAN中。
C.交換機之間的鏈路需要配置為trunk模式。
D.VTP沒有被配置為攜帶交換機之間VLAN信息。
E.交換機IP地址必須按順序配置為流量交換機之間轉發。
A.anycast frames
B.multicast frames
C.broadcast frames
D.unicast frames
A.OSPF and mumber of hops and reliability
B.EIGRP and link cost
C.IS-IS and delay and reliability
D.RIPv2 and number of hops
A.an OSPF update for network 192.168.0.0/16
B.a static router to network 192.168.10.0/24
C.a static router to network 192.168.10.0/24 with a local serial interface configured as the next hop
D.a RIP update for network 192.168.10.0/24
E.a directly connected interface with an address of 192.168.10.254/24
F.a default route with a next hop address of 192.168.10.1
A.dual stack
B.dynamic
C.Teredo
D.Manual 6to4
最新試題
請參見圖示。網絡中的所有設備均使用默認配置。此拓撲中存在多少個廣播域?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
要將數據包發送到遠程網絡,應使用哪種設備?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()