A.它是一個2層的消息協議，它保證通過網絡的VLAN配置
B.它包括一個8比特字段指定的幀的優先級
C.它是專門用于標記的VLAN幀和下交換網絡拓?fù)浣Y(jié)構的變化劑量不能滿足網絡的重新收斂
D.它修改802.3幀報頭，并且因此需要在FCS重新計算
E.它是一種能夠攜帶未標記的幀的中繼協議

A.any-to-many communication model
B.delivery of packets to the group interface that is closest to the sending device
C.one-to-many communication model
D.the same address for multiple devices in the group
E.one-to-nearest communication model
F.a unique IPV6 address for each device in the group

A.10.188.31.0/27
B.10.188.31.0/26
C.10.188.31.0/29
D.10.188.31.0/28
E.10.188.31.0/25

A.當從一個802.1Q中繼收到一個包時，VLAN ID可以從源MAC地址表確定
B.未知單播幀被重新傳輸只對屬于同一VLAN的端口
C.交換機之間的端口應該在接入模式被配置為使得VLAN可以橫跨端口跨越
D.廣播和多播幀被重發到在不同的VLAN配置的端口

A.主機E和主機F使用相同的IP網關地址
B.Router1和交換機2應通過交叉線進行連接
C.Router1上不會在主機A和主機D之間的通信中發揮作用
D.在Router1在f0/0接口必須與子接口進行配置
E.Router1上需要更多的LAN接口，以適應顯示在展示的VLAN
F.在Router1和交換機2的trunk端口f0/0接口必須使用相同的封裝類型進行配置

A.service timestamps debug datetime msec
B.show clock detail
C.clock calendar-valid
D.service timestamps log datetime msec

A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005

A.Configure the switch to be in VTP client mode.
B.Configure the switch to be in VTP domaint mode.
C.Configure the switch to be in VTP transparent mode.
D.Configure the switch to be in VTPv2.

A.source address and subnet mask
B.destination address and wildcard mask
C.source address and wildcard mask
D.destination address and subnet mask

A. VTP
B. 802.1q
C. IGP
D. ISL
E. 802.3u