The user of Host1 wants to ping the DSL modem/router at 192.168.1.254. Based on the Host1 ARP table that is shown in the exhibit, what will Host1 do()。
A.send a unicast ARP packet to the DSL modem/router
B.send unicast ICMP packets to the DSL modem/router
C.send Layer 3 broadcast packets to which the DSL modem/router responds
D.send a Layer 2 broadcast that is received by Host2, the switch, and the DSL modem/router
您可能感興趣的試卷
你可能感興趣的試題
A.It converges quickly.
B.OSPF is a classful routing protocol.
C.It uses cost to determine the best route.
D.It uses the DUAL algorithm to determine the best route.
E.OSPF routers send the complete routing table to all directly attached routers.
F.OSPF routers discover neighbors before exchanging routing information.
A.Router R2 will not form a neighbor relationship with R1.
B.Router R2 will obtain a full routing table, including a default route, from R1.
C.R2 will obtain OSPF updates from R1, but will not obtain a default route from R1.
D.R2 will not have a route for the directly connected serial network, but all other directly connected
A.One router is running RIPv1.
B.RIP neighbor is 224.0.0.9.
C.The network contains a loop.
D.Network 10.10.1.0 is reachable.
A.AH
B.MB5
C.PSK
D.ESP
A.172.31.17.4 /30
B.172.31.51.16 /30
C.172.31.64.0 /18
D.172.31.80.0 /22
E.172.31.92.0 /22
F.172.31.192.0 /18
A.ipv6 address PREFIX_1::1/64
B.ipv6 autoconfig 2001:db8:2222:7272::72/64
C.ipv6 autoconfig
D.ipv6 address 2001:db8:2222:7272::72/64
A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30
What can be determined from the line of show ip route output shown in the exhibit?()
A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.
A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound
A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface
最新試題
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
OSI 哪一層可提供有序的數據重構服務?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()