多項選擇題For what two purposes does the Ethernet protocol use physical addresses? ()

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

What can be determined from the line of show ip route output shown in the exhibit?()

A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.

2.單項選擇題使配置的訪問列表應用到接口上的命令是什么?()

A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound

3.多項選擇題Which destination addresses will be used by Host A to send data to Host C?()

A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface

4.單項選擇題在一個接口配置x25 map ip 102.112.43.125 x121-address 12345命令,其中102.112.43.125和123456分別是()。

A.對端的IP地址和對端的x.121地址
B.對端的IP地址和本接口的x.121地址
C.本接口的IP地址和對端的x.121地址
D.本接口的IP地址和本接口的x.121地址

5.單項選擇題Why will as witch never learn a broadcast address?()

A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.

6.單項選擇題Which command shows if an access list is assigned to an interface?()

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

7.多項選擇題x.25協議包含三層()。

A.分組層
B.數據鏈路層
C.物理層
D.傳輸層
E.網絡層

8.多項選擇題Which of the following are types of flow control?()

A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.load balancing

最新試題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

在Cisco IOS 設備中,啟動配置文件存儲于何處?()

題型:單項選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題