單項選擇題Which authentication protocol does H-REAP AP local authentication support in version 5.2?()

A.EAP-TLS
B.EAP-PEAP
C.EAP-LEAP
D.EAP-TTLS


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two range descriptions correctly describe IP addressing to use when enabling multicast support using the Cisco Unified Wireless Solution?()

A.globally scoped address range
B.239.0.0.X or 239.128.0.X address range
C.administratively scoped address range that does not overlap with a link-local MAC address
D.any Class D address range
E.site-local scoped address range

2.多項選擇題What two benefits result from Cisco WLC configuration of DCA for 5-GHz VoWLAN deployments?()

A.Avoid channels with microwave oven noise.
B.Manually remove channels not supported by the VoWLAN clients.
C.Avoid 802.11n 40-MHz wide channels.
D.Automatically avoid nearby radar.

3.單項選擇題Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a non-WMM-associated client frame that is H-REAP locally switched running v5.2?()

A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.
E.WLAN configured QoS level is used to set the wired DSCP priority.
F.Wired 802.1p CoS priority is not set.

4.單項選擇題Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?()

A.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, and finally  to all wireless clients of that Cisco WLC, via wireless multicast.
B.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, and finally to  all wireless clients of that Cisco WLC, via wireless unicast.
C.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless multicast.
D.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless multicast.
E.A packet is delivered to Cisco WLC and forwarded via multicast to all of its associated APs, discarded  at APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joinedwireless clients  via wireless unicast.
F.A packet is delivered to Cisco WLC and forwarded via unicast to all of its associated APs, discarded at  APs without SSID_X joined wireless clients, and forwarded at APs with SSID_X joined wireless clients  via wireless unicast.

6.單項選擇題What must be true about the client before upstream traffic stream metrics can be displayed on the Cisco WLC?()

A.must be Cisco Compatible Extensions version 2
B.must be Cisco Compatible Extensions version 3
C.must be Cisco Compatible Extensions version 4
D.must be associated to a Platinum QoS WLAN
E.must be associated to an access point on a Cisco WLC with code version 5.0 or newer

7.多項選擇題Which two statements are correct regarding multicast implementation using a WLAN controller (v5.2) and AP?()

A.Multicast traffic is sent out on Cisco APs at the highest mandatory data rate.
B.Multicast traffic is sent out on Cisco APs at the highest supported data rate.
C.On Cisco APs, multicast traffic and beacons are sent out at the same data rates to maintain a common  cell size for normal data as well as multicast data.
D.If there is more than one mandatory data rate, multicast traffic will be sent at the highest mandatory rate  and beacons will be sent at the lowest mandatory rate.
E.On Cisco APs, multicast traffic will be sent out at the highest data rate that a client can maintain with the  AP.

8.多項選擇題Which two messages can carry the TSPEC from client to the AP?()

A.probe request
B.association request
C.authentication request
D.reassociation request

9.單項選擇題What frame type is used to signal TSPEC reservation from a client?()

A.RSVP
B.ADDTS
C.802.11 association information elements
D.WMM capabilities exchange

10.單項選擇題Which protocol is used by multicast to prevent loops?()

A.OSPF
B.RIP
C.RPF
D.BGP
E.EIGRP

最新試題

What is the recommended Cisco DSCP value for a switch or router passing Cisco Unified Wireless IP Phone 7921G RTP packets?()

題型:單項選擇題

Which three actions are required to access the network statistics on a remote Cisco Unified Wireless IP Phone 7921G via a web browser?()

題型:多項選擇題

Which three statements are true about load-based Call Admission Control?()

題型:多項選擇題

Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a WMM-associated client frame that is H-REAP locally switched running v5.2?()

題型:單項選擇題

What is the Cisco recommended EDCF queue to use for voice TSPEC?()

題型:單項選擇題

What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?()

題型:單項選擇題

An LWAPP encapsulated packet is being sent from the Cisco WLC v5.2 to the AP for a wireless WMM client. Can the LWAPP frame be altered to change the resulting final WMM queue for transmission on an 802.11 client?()

題型:單項選擇題

For which WMM queue is U-APSD most beneficial?()

題型:單項選擇題

When using simultaneous voice and multicast on a single WLAN and RF band, what is the recommended DTIM value of the WLAN for VoWLAN devices?()

題型:單項選擇題

What is the minimum configuration you must do in order to enable multicast support on the CiscoWireless LAN Controller v5.2?()

題型:單項選擇題