A.buffering
B.cut-through
C.windowing
D.congestion avoidance
E.loadbalancing
您可能感興趣的試卷
你可能感興趣的試題
A. The ip classless command is enabled by default in recent versions of IOS.
B. The ip classless command should only be enabled when static routing is being used instead of a routing protocol.
C. The ip classless command should be enabled by the network administrator whenever RIPv1 or IGRP is being used.
D. The ip classless command should be enabled by the network administrator whenever OSPF, RIPv2, or EIGRP is being used.
A.1
B.10
C.1562
D.64000
E.128000
A.10.172.13.65
B.172.16.223.125
C.172.64.12.29
D.192.168.23.252
E.198.234.12.95
F.212.193.48.254
A. An IP address is required on the physical interface of the central router.
B. All routers are required to be fully meshed.
C. All routers must be in the same subnet to forward routing updates and broadcasts.
D. Multipoint is the default configuration for Frame Relay subinterfaces.
A. Router(config-line)# access-class 10 in
B. Router(config-if)# ip access-class 23 out
C. Router(config-line)# access-group 15 out
D. Router(config-if)# ip access-group 110 in
E. Router(config-line)# access-list 150 in
F. Router(config-if)# ip access-list 128 out
Which switch is the root bridge for VLAN 1?（）
A.Sw-DS1
B.Sw-AC1
C.Sw-AC2
D.Sw-AC3
Out of which port on Sw-Ac3 would a frame containing an IP packet with a destination address that is not on a local LAN be forwarded?（）
A.Fa0/1
B.Fa0/3
C.Fa0/4
D.Fa0/8
E.Fa0/9
F.Fa0/12
What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?（）
A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12
What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?（）
A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254
A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.
最新試題
Five minutes after issuing the show running-config command, a technician enters the command again and notices that several access list statements have been altered. Because of this, the technician believes that the router is being configured by an unknown person through Telnet. Before changing the router passwords, the technician would like to discover if anyone is connected to the router by Telnet and stop them from making further changes.Which commands will accomplish these options?（）
A router with a serial interface will be used for an ISDN link.What other function group devices are required to complete the connection to the service provider? （）
Which command is required for connectivity in a Frame Relay network if Inverse ARP is not operational? （）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. （）
Which of the following host addresses are member of networks that can be routed across the public Internet? （）
Which command is used to display the placement and direction of an IP access control list on a router?（）
Which characteristics are representative of a link-state routing protocol?（）
TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.（）
What feature of a networks switch allows an administrative to create separate broadcast domains?（）