單項選擇題Which command is required to apply an access list on a virtual terminal line of a router?（）

A. Router(config-line)# access-class 10 in
B. Router(config-if)# ip access-class 23 out
C. Router(config-line)# access-group 15 out
D. Router(config-if)# ip access-group 110 in
E. Router(config-line)# access-list 150 in
F. Router(config-if)# ip access-list 128 out


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Which switch is the root bridge for VLAN 1?（）

A.Sw-DS1
B.Sw-AC1
C.Sw-AC2
D.Sw-AC3

3.單項選擇題

What interface did Sw-AC3 associate with source MAC address 0010.5a0c.ffba?（）

A.Fa0/1
B.Fa0/3
C.Fa0/6
D.Fa0/8
E.Fa0/9
F.Fa0/12

4.單項選擇題

What address should be configured as the default-gateway for the host connected to interface Fa0/4 of Sw-AC3?（）

A.192.168.1.254
B.192.168.22.254
C.192.168.33.254
D.192.168.44.254

5.單項選擇題You are given a PC, a router, and a cable. Select the correct combination that will allow you to log into the router locally using a terminal emulation program such as HyperTerminal.（）

A. Connect the PC's COM port to the router's console port using a straight-through cable.
B. Connect the PC's COM port to the router's console port using a rollover cable.
C. Connect the PC's COM port to the router's ethernet port using a straight-through cable.
D. Connect the PC's ethernet port to the router's ethernet port using a rollover cable.
E. Connect the PC's ethernet port to the router's ethernet port using a straight- through cable.

6.單項選擇題After the show ip route command has been entered, the following routes are displayed. Which route will not be entered into the routing table of a neighboring router?（）

A. R 192.168.8.0/24 [120/1] via 192.168.2.2, 00:00:10, Serial0
B. R 192.168.11.0/24 [120/7] via 192.168.9.1, 00:00:03, Serial1
C. C 192.168.1.0/24 is directly connected, Ethernet0
D. R 192.168.5.0/24 [120/15] via 192.168.2.2, 00:00:10, Serial0

7.單項選擇題What is the purpose of this command? ip route 0.0.0.0 0.0.0.0 serial0/0（）

A. It configures a router to send all packets out interface serial 0/0.
B. It configures a router to block routing updates from being sent out interface serial 0/0.
C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0.
D. It configures a router to send all packets for unknown destination networks out interface serial 0/0.
E. It configures a router to drop all packets for which the destination network is unknown.

8.單項選擇題What is the purpose of the command shown below?vtp password Fl0r1da（）

A. It is used to validate the sources of VTP advertisements sent between switches.
B. It is used to access the VTP server to make changes to the VTP configuration.
C. It allows two VTP servers to exist in the same domain, each configured with different passwords.
D. It is the password required when promoting a switch from VTP client mode to VTP server mode.
E. It is used to prevent a switch newly added to the network from sending incorrect VLAN information to the other switches in the domain.

9.單項選擇題

A company is experiencing network delays. The network administrator discovers that a worker in a location far from the MDF has connected an old 10BASE-T switch with redundant links to the existing network.
How could this action be responsible for the impaired network performance?（）

A. Connecting a host to the old switch has created a broadcast storm.
B. The 10BASE-T switch forced the entire network to be reduced to 10 Mbps operation.
C. The old switch does not support VLANs, which has disabled the VLAN configuration of the entire the network.
D. The old switch does not support full-duplex operation, effectively forcing half-duplex operation throughout the network.
E. Spanning Tree Protocol has elected the old switch as the root bridge, creating inefficient data paths through the switched network.

10.多項選擇題Which of the following services use TCP?（）

A.DHCP
B.SMTP
C.SNMP
D.FTP
E.HTTP
F.TFTP

最新試題