A. Additional DHCP options will be imported from another DHCP server.
B. The DHCP server pools need to be bound to an interface to operate.
C. This configuration will provide IP configuration information to two different su bnets.
D. Additional DCHP option information needs to be imported from another DHCP server.
E. If the router hands out all the addresses in pool 1, then it will supply addresses from pool 2.

A. Hosts belonging to DHCP pool  1 and pool 2 will retain their IP settings for 30 hours before they must renew.
B. Hosts will receive IP settings from pool 1 until the addresses run out, and then hosts will receive the settings from pool 2.
C. Hosts in the 10.10.20.0/24 subnet will u se 10.10.20.50 as its DNS server.
D. DHCP pool 0 needs to have the ip dhcp excluded - address command to exclude the default router and DNS servers.

A. The IP address can be automatically assigned to a host.
B. The IP address can be assigned as a random hash value of the burned - in - address of the lowest - numbered LAN interface on the router.
C. The network administrator can assign a speci fic IP address to a specific host MAC address.
D. The IP address can be assigned from configured pools in a reverse lexicographical order.
E. The IP address can be assigned to a host for a limited time or until the host explicitly releases the address.
F. The IP address can be assigned to a host until the host usurps the assigned value using its own dynamic override mechanism.

A. The default administrative distance has been changed.
B. IS - IS is not enabled.
C. Three physical interfaces are taking part in integrated IS - IS.
D. IS - IS is not redistributing any oth er routing protocols.
E. There are two neighboring routers sending IS - IS routing information.
F. Address summarization is configured.

A.The router is in area 49.0001.0002
B.The router acts as a Level 1 - 2 router
C.CLNS routing is enable d for the router
D.The router has a system ID of 0003.0004
E.The interfaces have a functional IS - IS configuration
F.The network service access point selector (NSEL) byte has a value of 0

A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packets
B.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLC
C.The SNPA for RTE is the source data link address that is used to transmit frames to RTD
D.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLC
E.The NET for RTE will be 49.0150.0019.06b7.fd5f.00
F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS

A.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 10.0.0.2
B.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 20.0.0.1
C.R1(config)# interface fastethernet 0/0   R1(config - if)# ip help er - address 20.0.0.2R   1(config - if)# ip helper - address 20.0.0.3   R1(config - if)# ip helper - address 20.0.0.4   R1(config - if)# exit   R1(config)# interface fastethernet 0/1   R1(config - if)# ip helper - address 10.0.0.1
D.R1(config)# interface fastethernet 0/0   R1 (config - if)# ip helper - address 20.0.0.1   R2(config)# interface fastethernet 0/0   R2(config - if)# ip helper - address 20.0.0.1   R3(config)# interface fastethernet 0/0   R3(config - if)# ip helper - address 20.0.0.1   R4(config)# interface fastethernet 0/0   R4(config - if)# ip helper - address 20.0.0.1
E.S1(config)# interface fastethernet 0/1   S1(config - if)# ip helper - address 10.0.0.2   R2(config)# interface fastethernet 0/0   R2(config - if)# ip helper - address 20.0.0.1   R3(config)# interface fastethernet 0/0   R3(config - if) # ip helper - address 20.0.0.1   R4(config)# interface fastethernet 0/0   R4(config - if)# ip helper - address 20.0.0.1

A. If a packet is sent to a multicast group address, the multicast frame contains the source multicast address.
B. A router does not have to be a member of a multicast group to recei ve multicast data.
C. A router must be a member of a multicast group to send to the group.
D. A router does not have to be a member of a multicast group to send to the group.
E. If a packet is sent to a multicast group address, all members of the multic ast group will receive it.
F. A router must be a member of a multicast group to receive multicast data.

A.Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3
B.Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget her
C.Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1
D.Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers
E.The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses
F.Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA

A. The area cannot be a backbone area.
B. Inter area routes are suppressed.
C. The area has no more than 10 routers.
D. No virtual links are allowed.
E. No autonomous system border routers are allowed.
F. Redistribution is not allowed unless the packet is changed to a type 7 packet.