A. The area cannot be a backbone area.
B. Inter area routes are suppressed.
C. The area has no more than 10 routers.
D. No virtual links are allowed.
E. No autonomous system border routers are allowed.
F. Redistribution is not allowed unless the packet is changed to a type 7 packet.

A. The map prohibits th e redistribution of all type 2 external OSPF routes.
B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.
C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.
D. Th e map permits the redistribution of all type 1 external OSPF routes.
E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.
F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.

A. 20
B. 10
C. 0
D. 1

A. Only traffic with a destination from 10.10.0.0/19 will be permitted.
B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.
C. Only traffic going to 10.10.0.0/19 will be permitted.
D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.

A. CGMP version 2 is being used.
B. The switch will use sparse mode first, dense mode second.
C. A rendezvous point must be configured in order for the interface to operate in sparse mode.
D. IGMP version 2 is being used.
E. The rendezvous point is IP address 172.16.4.16.
F. If a rendezvous point is configured, the interface cannot operate in dense mode.

A. The router sent an IGMP version 2 query out interface Ethernet1 at multicast address 224.0.0.1.
B. Router RTA received an IGMP report version 1 from host 192.168.9.1.
C. Reverse Path Forwarding (RPF) is ena bled for 192.168.9.4.
D. Reverse Path Forwarding (RPF) is enabled for 224.0.1.40.
E. The IP multicast groups are 224.0.0.1, 224.0.1.40, and 239.255.0.1.
F. IP PIM RP mapping is static.

A. IGMP
B. IGMP snooping
C. PIM
D. CGMP
E. static assignment
F. CDP

A. Sparse mode multicast uses a pull model to send multicast traffic to where it is requested
B. Dense mode multicast uses a push model to flood traffic throughout the network and then prunes the unwanted traffic
C. Dense mode multicast requires explicit join messa ges from their members
D. Sparse mode uses reverse path forwarding (RPF) to prune off redundant flows
E. The primary use of sparse mode multicast is for test labs and router performance testing

A. The multicast sources must register with the RP to form the multicast distribution tree
B. An RP is required only in networks running Protocol Independent Multicast dense mode ( PIM DM)
C. The multicast receivers must register with the RP to form the multicast distribution tree
D. An RP is required only in networks running Protocol Independent Multicast sparse mode (PIM SM)
E. An RP is required only in networks running Pro tocol Independent Multicast sparse - dense mode (PIM - SDM)
F. To form the multicast distribution tree, the multicast sources register with and the receivers join the RP

A. both routers R1 and R2
B. router R1
C. router R2
D. none of the routers since they are not configured with static RP