A. Only traffic with a destination from 10.10.0.0/19 will be permitted.
B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.
C. Only traffic going to 10.10.0.0/19 will be permitted.
D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.

A. CGMP version 2 is being used.
B. The switch will use sparse mode first, dense mode second.
C. A rendezvous point must be configured in order for the interface to operate in sparse mode.
D. IGMP version 2 is being used.
E. The rendezvous point is IP address 172.16.4.16.
F. If a rendezvous point is configured, the interface cannot operate in dense mode.

A. The router sent an IGMP version 2 query out interface Ethernet1 at multicast address 224.0.0.1.
B. Router RTA received an IGMP report version 1 from host 192.168.9.1.
C. Reverse Path Forwarding (RPF) is ena bled for 192.168.9.4.
D. Reverse Path Forwarding (RPF) is enabled for 224.0.1.40.
E. The IP multicast groups are 224.0.0.1, 224.0.1.40, and 239.255.0.1.
F. IP PIM RP mapping is static.

A. IGMP
B. IGMP snooping
C. PIM
D. CGMP
E. static assignment
F. CDP

A. Sparse mode multicast uses a pull model to send multicast traffic to where it is requested
B. Dense mode multicast uses a push model to flood traffic throughout the network and then prunes the unwanted traffic
C. Dense mode multicast requires explicit join messa ges from their members
D. Sparse mode uses reverse path forwarding (RPF) to prune off redundant flows
E. The primary use of sparse mode multicast is for test labs and router performance testing

A. The multicast sources must register with the RP to form the multicast distribution tree
B. An RP is required only in networks running Protocol Independent Multicast dense mode ( PIM DM)
C. The multicast receivers must register with the RP to form the multicast distribution tree
D. An RP is required only in networks running Protocol Independent Multicast sparse mode (PIM SM)
E. An RP is required only in networks running Pro tocol Independent Multicast sparse - dense mode (PIM - SDM)
F. To form the multicast distribution tree, the multicast sources register with and the receivers join the RP

A. both routers R1 and R2
B. router R1
C. router R2
D. none of the routers since they are not configured with static RP

A. Configure each switch with PIM sparse mode and a separate instance of PIM dense mode.Specify switch 1 as the root for the RPI Multicast Server. Specify switch 2 as the root for the CMU Multicast Server.
B. Configure each switch with PIM sparse mode and a separate instance of PIM dense mode. Leave each multicast server as the root of its own multicast tree.
C. Configure each switch with PIM sparse - dense mode. Configure switch 3 as a ren dezvous point for the RPI multicast stream.
D. Configure each switch with PIM sparse mode and a separate instance of PIM dense mode.Allow the switches to elect their own root for each multicast tree.
E. Configure each switch with PIM sparse mode.
F.  Configure each switch with PIM dense mode.

A. The Multicast Server is the root of the multicast tree. Switches 1, 3, 4, and 5 will participate in the multicast tree once pruning has taken place.
B. The Multicast Serv er is the root of the multicast tree. Switches 4 and 5 will participate in the multicast tree once pruning has taken place.
C. Switch 3 is the root of the multicast tree. Switches 3,4, and 5 will participate in the multicast tree once pruning has taken  place.
D. Switch 3 is the root of the multicast tree. Switches 1,3,4, and 5 will participate in the multicast tree once pruning has taken place.
E. Switch 1 is the root of the multicast tree. Switches 1,4, and 5 will participate in the multicast tree once pruning has taken place.
F. Switch 1 is the root of the multicast tree. Switches 1,3,4, and 5 will participate in the multicast tree once pruning has taken place.

A. PIM sparse - dense mode and PIM dense mode require an RP on the network.
B. PIM sparse mode and PIM dense mode require an RP on the network.
C. PIM sparse mode interfaces are always added to the multicast routing table in a router.
D. PIM sparse mode and PIM sparse - dense mode require an RP on the network.
E. PIM dense mode interfaces are always added to the multicast routing table in a router.
F. PIM sparse - dense mode acts as PIM dense mode if an RP is not known.