A new Aironet 1200 series AP has been installed in the Company WLAN.
What happens when this device is connected to the LAN, with a default configuration?()
A. The access point will attempt to download an encryption key from the nearest wireless server.
B. The access point makes several attempts to get an IP address from the DHCP server. If the access point does not receive an address, it assigns itself the IP address 10.0.0.1 for 5 minutes.
C. The access point will attempt to connect to the nearest wireless server using LEAP authentication.
D. The access point requests an IP address from the DHCP server. If the access point does not receive an address, it continues to send requests indefinitely.
E. None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
You need to determine the correct wireless LAN topology for use in the Company network.
Which three statements are true about the various WLAN topologies?()
A. In ad hoc mode, the Independent Basic Service Set (IBSS) is a framework in which mobile clients connect directly without an intermediate access point.
B. In Infrastructure mode, the Basic Service Set (BSS) is a framework in which mobile clients use a single access point for connecting to each other or to wired network resources.
C. In Infrastructure mode, the Extended Services Set (ESS) is a framework in which two or more Basic Service Sets are connected by a common distribution system (DS).
D. In Infrastructure mode, the Independent Basic Service Setet (IBSS) is a framework in which mobile clients connect directly without an intermediate access point.
E. In ad hoc mode, the Basic Service Set (BSS) is a framework in which mobile clients use a single AP for connecting to each other or to wired network resources.
F. In ad hoc mode, the Extended Services Set (ESS) is a framework in which two or more Basic Service Sets are connected by a common distribution system (DS)
As the Company wireless administrator, you required to be knowledgeable about the wireless LAN components.
Which two statements about these components are true? ()
A. In the autonomous access point solution, control is provided by the WLAN controller.
B. In the lightweight access point solution, WLAN management is provided by the WLAN Control System (WCS).
C. In the autonomous access point solution, control is provided by the WDS (Wireless Domain Services).
D. Cisco Aironet autonomous access points cannot be supported by the Cisco Unified Wireless Network.
E. Ii the lightweight access point solution, WLAN management is provided by the WLAN Solution Engine (WLSE).
F. Cisco Aironet lightweight access points cannot be supported by the Cisco Unified Wireless Network.
The Company wireless network is using 802.11G access points.
Which two statements are true about these access points? ()
A. It supports eight different data rates.
B. It is fully backward compatible with 802.11b
C. It provides the same network throughput with 802.11b clients, 802.11g clients, or a mixed environment where both clients are present.
D. It is only compatibly with the 11 Mbps 802.11b transfer rate.
E. It has three non-overlapping channels in its channel options.
Refer to the exhibit.
Which two Lightweight Access Point statements are true?()
A. An AP that has been upgraded from an autonomous AP to lightweight AP will only function in conjunction with a Cisco Wireless LAN controller.
B. LWAPP increases the amount of processing within the APs, enabling them to support filtering and policy enforcement features.
C. WLAN controllers provide a single point of management.
D. Lightweight APs require local configurations using local management.
E. Real time events such as authentication, security management, and mobility are handled by the lightweight AP.
F. Autonomous APs receive control and configuration information from a WLAN controller.
On the Company wireless LAN, A client is searching for an access point (AP).
What is the correct process order that this Company client and access point goes through in order to create a connection?()
A. association request/response, probe request/response, authentication request/response
B. association request/response, authentication request/response, probe request/response
C. probe request/response, authentication request/response, association request/response
D. probe request/response, association request/response, authentication request/response
E. None of the other alternatives apply
Refer to the exhibit. The signal transmitted from the AP is reflected off a wall resulting in multipath interference at the client end.
Which statement is true? ()
A. The transmitted signal from the AP arrives at the client at slightly different times resulting in phase shifting.
B. If signal 2 is close to 360 degrees out of phase with signal 1, the result is essentially zerosignal or a dead spot in the WLAN.
C. Multipath interference is less of an issue when using a DSSS technology because multipath is frequency selective.
D. If signal 1 is in phase with signal 2, the result is essentially zerosignal or a dead spot in the WLAN.
E. Multipath interference is solved by using dual antennas.
You work as a network technician at Company. Please study the exhibit carefully. In this
Company wireless network, the LAP (lightweight access point) attempts to register to a WLC (Wireless LAN Controller).
What kind of message is transmitted?()
A. The lightweight access point will send Layer 2 and Layer 3 Lightweight Access Point (LWAPP) mode discovery request messages at the same time.
B. The lightweight access point will send Layer 3 Lightweight Access Point (LWAPP) mode discovery request messages only.
C. The lightweight access point will send Layer 2 Lightweight Access Point (LWAPP) mode
D.iscovery request messages. If the attempt fails, the LAP will try Layer 3 LWAPP WLC discovery. D. The lightweight access point will send Layer 2 Lightweight Access Point (LWAPP) mode discovery request messages only.
LDAP is being used throughout the Company wireless network.
Which statement about the Lightweight Access Point Protocol (LWAPP) protocol is true?()
A. The processing of 802.11 data and management protocols and access point capabilities is distributed between a lightweight access point and a centralized WLAN controller.
B. LWAPP advertises its WDS capability and participates in electing the best WDS device for the wireless LAN.
C. LWAPP aggregates radio management forward information and sends it to a wireless LAN solution engine.
D. LWAPP authenticates all access points in the subnet and establishes a secure communication channel with each of them.
E. None of the other alternatives apply
Refer to the exhibit. Both host stations are part of the same subnet but are in different VLANs. On the basis of the information presented in the exhibit,
which statement is true about an attempt to ping from host to host? ()
A. The two different hosts will need to be in the same VLAN in order for the ping command to be successful.
B. A Layer 3 device is needed for the ping command to be successful.
C. The ping command will be successful without any further configuration changes.
D. A trunk port will need to be configured on the link between Sw_A and Sw_B for the ping command to be successful.
Based on the network diagram and routing table output in the exhibit,
which of these statements is true? ()
A. InterVLAN routing will not occur since no routing protocol has been configured.
B. InterVLAN routing has been configured properly, and the workstations have connectivity to each other.
C. Although interVLAN routing is not enabled, both workstations will have connectivity to each other.
D. Although interVLAN routing is enabled, the workstations will not have connectivity to each other.
最新試題
Which statement is correct about RSTP port roles?()
Refer to the exhibit. What does the command channel-group 1 mode desirable do? ()
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port:00:06:34: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/5 (not half duplex), with SW_A FastEthernet0/4 (half duplex) , with TBA05071417(Cat6K-B) 0/4 (half duplex). What would be the possible outcome of the problem?()
Refer to the exhibit. Which statement is true about the output?()
Which three statements are true of the Link Aggregation Control Protocol (LACP)?()
Refer to the exhibit. Initially, LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link?()
Refer to the exhibit. LACP has been configured on Switch1 as shown. Which is the correct command set to configure LACP on Switch2?()
What two things will occur when an edge port receives a BPDU?()
What is the configured priority value of the Vlan105’s group on DS2 ?()
Refer to the exhibit. STP has been implemented in the network. Switch SW_A is the root switch for the default VLAN. To reduce the broadcast domain, the network administrator decides to split users on the network into VLAN 2 and VLAN 10. The administrator issues the command spanning-tree vlan 2 root primary on switch SW_A. What will happen as a result of this change?()