多項選擇題

A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.
Which of the following must you do to accomplish this?()

A. You must set each end of the trunk line to IEEE 802.1e encapsulation.
B. You must set the same VTP management domain name on both switches.
C. You must set all ports on the two switches as access ports.
D. You must configure one of the switches as a VTP server.
E. You must use a rollover cable to connect the two switches.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method.
When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?()

A. Switch(config)# switchport trunk encapsulation isl
B. Switch(config)# switchport trunk encapsulation ietf
C. Switch(config-if)# switchport trunk encapsulation isl
D. Switch(config-if)# switchport trunk encapsulation ietf
E. Switch(config-if)# switchport trunk encapsulation dot1q

2.多項選擇題Which of the following steps are necessary in order to add a new VLAN to a switched network?()

A. Create the VLAN.
B. Name the VLAN.
C. Configure an IP address for the VLAN.
D. Add the desired ports to the new VLAN.
E. Add the VLAN to the VTP domain.

3.多項選擇題Which router console commands are used to manage telnet sessions to other routers? ()

A. TestKingD# disconnect 3
B. TestKingD# exit session 2
C. TestKingD# kill connection 1
D. TestKingD# show sessions
E. TestKingD# show connection all
F. TestKingD# resume 4

4.單項選擇題

You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines.
What command would assign this access- list to the Virtual Terminal Lines?()

A. router(config-line)# ip access-group 1 in
B. router(config-line)# access-class 1 in
C. router(config-line)# ip access-list 1 in
D. router(config-line)# access-line 1 in

5.多項選擇題You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?()

A. Administratively shut down the interface.
B. Physically secure the interface.
C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
D. Configure a virtual terminal password and login process.
E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

7.單項選擇題You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()

A. Switch(config)# ip default-network 192.168.12.1
B. Switch(config)#ip route-default 192.168.12.1
C. Switch(config)# ip default-gateway 192.168.12.1
D. Swicth(config)# ip route 192.168.12.1 0.0.0.0

8.單項選擇題Which command will assign the last usable IP address from the 192.168.32.128/28 subnetwork to a router interface?()

A. TestKingA(config-if)# ip address 192.168.32.142 255.255.255.240
B. TestKingA(config-if)# ip address 192.168.32.143 255.255.255.240
C. TestKingA(config-if)# ip address 192.168.32.158 255.255.255.240
D. TestKingA(config-if)# ip address 192.168.32.145 255.255.255.240
E. TestKingA(config-if)# ip address 192.168.32.144 255.255.255.240

9.多項選擇題Which of the following addresses can be assigned to a host when using a subnet mask of 255.255.254.0?()

A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.3.255
E. 152.135.7.0
F. 17.35.36.0

10.單項選擇題You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?()

A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B. router(config-if)#142.8.2.1 0.0.3.255
C. router(config-if)#ip address 142.8.2.1 255.255.252.0
D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E. router(config-if)#ip address 142.8.2.1 0.0.3.255
F. router(config-if)#ip address 142.8.2.1 subnet mask /22

最新試題

Given a subnet mask of 255.255.255.224, which of the following addresses can be assigned to network hosts?()

題型:多項選擇題

How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()

題型:?jiǎn)雾?xiàng)選擇題

Which command is used to display the placement and direction of an IP access control list on a router?()

題型:?jiǎn)雾?xiàng)選擇題

Which of the following options lists the steps in PPP session establishment in the correct order?()

題型:?jiǎn)雾?xiàng)選擇題

What does a configuration Register Setting of 0x2105 indicate to the Router? ()

題型:?jiǎn)雾?xiàng)選擇題

The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()

題型:?jiǎn)雾?xiàng)選擇題

Which of the following contribute to congestion on an Ethernet network?()

題型:多項選擇題

Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?()

題型:?jiǎn)雾?xiàng)選擇題

All WAN links is side the TestKing.com network use PPP with for authentication security. Which command will display the CHAP authentication process as it occurs between two routers in the network?()

題型:?jiǎn)雾?xiàng)選擇題

Which connections allow the use of full-duplex Ethernet?()

題型:多項選擇題