單項選擇題

You wish to limit telnet access into your Cisco router to only a single host. In order to accomplish this, access list 1 has been written to allow host 172.16.1.224 access to the router vty lines.
What command would assign this access- list to the Virtual Terminal Lines?()

A. router(config-line)# ip access-group 1 in
B. router(config-line)# access-class 1 in
C. router(config-line)# ip access-list 1 in
D. router(config-line)# access-line 1 in


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?()

A. Administratively shut down the interface.
B. Physically secure the interface.
C. Create an access list and apply it to the virtual terminal interfaces with the access-group command.
D. Configure a virtual terminal password and login process.
E. Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

3.單項選擇題You need to set the default gateway of one of your TestKing switches. Which command will set the default gateway to 192.168.12.1 on a Cisco switch?()

A. Switch(config)# ip default-network 192.168.12.1
B. Switch(config)#ip route-default 192.168.12.1
C. Switch(config)# ip default-gateway 192.168.12.1
D. Swicth(config)# ip route 192.168.12.1 0.0.0.0

4.單項選擇題Which command will assign the last usable IP address from the 192.168.32.128/28 subnetwork to a router interface?()

A. TestKingA(config-if)# ip address 192.168.32.142 255.255.255.240
B. TestKingA(config-if)# ip address 192.168.32.143 255.255.255.240
C. TestKingA(config-if)# ip address 192.168.32.158 255.255.255.240
D. TestKingA(config-if)# ip address 192.168.32.145 255.255.255.240
E. TestKingA(config-if)# ip address 192.168.32.144 255.255.255.240

5.多項選擇題Which of the following addresses can be assigned to a host when using a subnet mask of 255.255.254.0?()

A. 113.10.4.0
B. 186.54.3.0
C. 175.33.3.255
D. 26.35.3.255
E. 152.135.7.0
F. 17.35.36.0

6.單項選擇題You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?()

A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B. router(config-if)#142.8.2.1 0.0.3.255
C. router(config-if)#ip address 142.8.2.1 255.255.252.0
D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E. router(config-if)#ip address 142.8.2.1 0.0.3.255
F. router(config-if)#ip address 142.8.2.1 subnet mask /22

7.多項選擇題You have been asked to configure a default route. Which of the IOS commands mentioned below will accomplish this task?()

A. LTD(config)# ip route 0.0.0.0 0.0.0.0 192.168.15.36
B. LTD(config)# ip route 0.0.0.0 192.168.15.36 255.255.255.255
C. LTD# ip default-network 0.0.0.0 192.168.15.36 255.255.255.255
D. LTD(config)# ip route 0.0.0.0 0.0.0.0 E0
E. LTD(config)# ip route 0.0.0.0 255.255.255.255 S0
F. LTD(config-router)# ip route 255.255.255.255 0.0.0.0 192.168.15.36

8.單項選擇題Which of the following commands would you use, to configure a default route to any destination NOT found in the routing table?()

A. Router(config)# ip default-route 0.0.0.0 255.255.255.255 s0
B. Router(config)# ip route 0.0.0.0 255.255.255.255 s0
C. Router(config)# ip default-route 0.0.0.0 0.0.0.0 s0
D. Router(config)# ip route 0.0.0.0 0.0.0.0 s0
E. Router(config)# ip route any any e0

9.多項選擇題Which of the commands below can you use to configure a default route?()

A. TK1(config)# ip route 0.0.0.0 0.0.0.0 E0
B. TK1(config)# ip route 0.0.0.0 255.255.255.255 S0
C. TK1(config-interface)# ip route 255.255.255.255 0.0.0.0 192.168.1.21
D. TK1(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.21
E. TK1(config)# ip route 0.0.0.0 192.168.1.21 255.255.255.255
F. TK1# ip default-network 0.0.0.0 192.168.1.21 255.255.255.255

10.多項選擇題The following configuration command was entered into a router:ip route 172.16.3.0 255.255.255.0 192.168.2.4 Which of the following statements are true regarding this configuration change?()

A. The default administrative distance is used.
B. The command is used to establish a static route.
C. The command is used to configure the router interfaces.
D. The command is used to establish a stub network.
E. The subnet mask for the source address is 255.255.255.0

最新試題

New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? ()

題型:?jiǎn)雾?xiàng)選擇題

Which of the following options lists the steps in PPP session establishment in the correct order?()

題型:?jiǎn)雾?xiàng)選擇題

Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()

題型:多項選擇題

TestKing.com has allocated the IP add 199.144.27.0 is its network, to provide flexibility for the LAN design, a subnet mask of 255.255.255.240 has been chosen. Which of the following address can be assigned to LAN on the resulting subnets.()

題型:多項選擇題

Which connections allow the use of full-duplex Ethernet?()

題型:多項選擇題

A Router with a BRI/T interface will be used for an ISDN Connection what other ISDN device is required to complete this connection? ()

題型:?jiǎn)雾?xiàng)選擇題

Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?()

題型:?jiǎn)雾?xiàng)選擇題

Which statement describes the rule of split horizon?()

題型:?jiǎn)雾?xiàng)選擇題

Which command is used to display the placement and direction of an IP access control list on a router?()

題型:?jiǎn)雾?xiàng)選擇題

An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? ()

題型:多項選擇題