A.802.1
B.Framerelay
C.HDLC
D.PPP
E.SLIP
F.PAP
您可能感興趣的試卷
你可能感興趣的試題
Which dynamic routing protocol should be recommended for the Testking networkshown in the graphic above?()
A. OSPF
B. RIP version 1
C. RIP version 2
D. IGRP
E. EIGRP
A. It uses a Reliable transport mechanism.
B. It uses a Non-reliable transport mechanism
C. It is less bandwidth-intensive than connection oriented services
D. it uses handshaking
A. ISDN
B. Wireless
C. Frame Relay
D. T1 leased line
E. ATM
F. VPN
A. 255.255.255.224
B. 255.255.255.248
C. 0.0.0.224
D. 0.0.0.8
E. 0.0.0.7
F. 0.0.0.3
A. The source and destination addresses
B. The destination port number
C. The destination address
D. The source address
E. All of the above
A. 192.168.16.32 0.0.0.16
B. 192.168.16.43 0.0.0.212
C. 192.168.16.0 0.0.0.15
D. 192.168.16.32 0.0.0.15
E. 192.168.16.0 0.0.0.31
F. 192.168.16.16 0.0.0.31
A. Router(config)# access-list 1 deny 172.31.212.74 any
B. Router(config)# access-list 1 deny 10.6.111.48 host
C. Router(config)# access-list 1 deny 172.16.4.13 0.0.0.0
D. Router(config)# access-list 1 deny 192.168.14.132 255.255.255.0
E. Router(config)# access-list 1 deny 192.168.166.127 255.255.255.255
A. You can delete individual statements in a named access list
B. Named access lists require a numbered range from 1000 to 1099.
C. Named access lists must be specified as standard or extended.
D. You can use the ip access-list command to create named access lists.
E. You cannot delete individual statements in a named access list.
F. You can use the ip name-group command to apply named access lists.
A. access-list 15 deny telnet any 10.10.1.0 0.0.0.255 eq 23
B. access-list 115 deny udp any 10.10.1.0 eq telnet
C. access-list 15 deny tcp 10.10.1.0 255.255.255.0 eq telnet
D. access-list 115 deny tcp any 10.10.1.0 0.0.0.255 eq 23
E. access-list 15 deny udp any 10.10.1.0 255.255.255.0 eq 23
A. access-list 101 permit tcp any 172.17.18.252 0.0.0.0 eq 80
B. access-list 1 permit tcp any 172.17.17.252 0.0.0.0 eq 23
C. access-list 101 permit tcp 172.17.17.252 0.0.0.0 any eq 23
D. access-list 101 deny tcp any 172.17.17.252 0.0.0.0 eq 23
E. access-list 101 deny tcp any 172.17.18.252 0.0.0.0 eq 80
F. access-list 101 permit tcp any 172.17.17.252 0.0.0.0 eq 23
最新試題
Which of the following options lists the steps in PPP session establishment in the correct order?()
What is a global command?()
Identify three valid host addresses in the 192.168.27.0 network with a subnet mask of 255.255.255.240. ()
Which Frame Relay feature is responsible for transmitting keepalives to ensure that the PVC does not shut down because of inactivity?()
What does a configuration Register Setting of 0x2105 indicate to the Router? ()
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? ()
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? ()
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? ()
Which of the following contribute to congestion on an Ethernet network?()
Which command is used to display the placement and direction of an IP access control list on a router?()