A.show ip ospf
B.show ip protocols
C.show ip ospf neighbor
D.show ip ospf interface
您可能感興趣的試卷
你可能感興趣的試題
You have a multi-area OSPF network and you’re concerned because one of the sites is havingconnectivity problem to resources in a different area. Which IOS privileged mode command wouldyou enter to confirm that your network：
（A） has a path to its ABR，
（B） has a path to its ASBR， and
（C）the SPF calculation is functional？（）
A.show ip protocols
B.show running-config
C.show ip ospf neighbor
D.show ip ospf border-routers
A.show ip ospf
B.show ip route
C.show ip protocol
D.show ip ospf database
E.None of the other alternatives apply
A.Each router has an identical link state database
B.External routes are imported into a separate link state database
C.Synchronization of link state databases is maintained via flooding of LSAs
D.Information in the link state database is used to build a routing table by calculating a shortest-path tree
E.By default， link state databases are refreshed every 10 minutes in the absence of topologychanges
DR （Designated Router） is for environments where many routers on the same network such asEthernet. In the following presented network， all routers are reloaded simultaneously， and DR isselected as expected. What is the CK-RTC status？（）
A.2WAY/BDR
B.FULL/BDR
C.2WAY/DROTHER
D.2WAY/DR
E.FULL/DROTHER
F.FULL/DR
G.None of the other alternatives apply
A.Spanning Tree Protocol（STP）
B.Delay reduction
C.Hot Standby Routing Protocol（HSRP）
D.Dynamic routing protocols
E.Quality of Service（QoS）
F.Jitter management
Refer to the exhibit. On the basis of the information presented， which statement is true？（）
A.OSPF router 5.0.0.2 is an ABR
B.Network 6.0.0.0/8 was learned from an OSPF neighbor within the area
C.The default route is learned from an OSPF neighbor
D.A default route is configured on the local router
From the perspective of routerPG-1，what kind of router is the router with IP address 192.23.1.1（）
A.A peer router runningIBGP
B.A peer router runningEBGP
C.A community member running IBGP
D.A peer group member running IBGP
E.A peer group member running EBGP
A.The K-values do not match
B.The hold times do not match
C.The hello times do not match
D.The AS numbers do not match
A.debug eigrp packets
B.show ip eigrp traffic
C.show ip eigrp topology
D.show ip eigrp neighbors
A.Some query or reply packets are lost between the routers
B.The neighboring router starts receiving route updates from this router
C.A failure causes traffic on a link between two neighboring routers to flow in only one direction（unidirectional link）
D.The neighboring router stops receiving ACK packets from this router
最新試題
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
Drag and drop each management protocol on the above to the correct category on the below.
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）
Which statement correctly describes IPsec VPN backup technology？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below