Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface PortChannel13
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface PortChannel23
switchport mode trunk
switchport trunk allowed vlan 1-9!
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 10!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 10!
On Which device is the fault condition located？（）
A.ASW1
B.DSW1
C.Client 1
D.FTP Server
您可能感興趣的試卷
你可能感興趣的試題
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
What is the solution of the fault condition？（）
A.Given an IP address to VLAN 1 on DSW1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue switchport access vlan 10 command on interfaces fa1/0/1 and fa1/0/2 on ASW1
D.Give static IP addresses to Client 1 and Client 2
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport access vlan 1!
Interface FastEthernet1/0/2
switchport mode access
switchport access vlan 1
The Fault Condition is related to which technology？（）
A.VLAN
B.InterVLAN communication
C.DHCP
D.Port Security
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital troubleshootingshows that port Fa1/0/1 on ASW1 is in errdisable state.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport port-security
switchport port-security mac-address 0000.0000.0001
What is the solution of the fault condition？（）
A.Configurationure Static IP Address on Client 1
B.Change the IP Address of VLAN 10 on DSW1
C.Issue shutdown command followed by no shutdown command on port fa1/0/1 on ASW1
D.Issue no switchport port-security mac-address 0000.0000.0001 command followed by shutdown and noshutdown command on port fa1/0/1 on ASW1
E.Issue no switchport port-security mac-address 0000.0000.0001 command on port fa1/0/1 on ASW1
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital troubleshootingshows that port Fa1/0/1 on ASW1 is in errdisable state.
Configurationon ASW1
Interface FastEthernet1/0/1
switchport mode access
switchport port-security
switchport port-security mac-address 0000.0000.0001
The Fault Condition is related to which technology？（）
A.VLAN Access Map
B.InterVLAN communication
C.DHCP
D.Port Security
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Cisco 642-832： Practice ExamServer
Configurationon DSW1
vlan access-map test1 10drop
match ip address 10!
vlan filter test1 vlan-list 10!
ip access-list standard 10permit 10.2.0.0 0.0.255.255!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0!
What is the solution of the fault condition？（）
A.Configurationure Static IP Address on Client 1
B.Change the IP Address of VLAN 10 on DSW1
C.Add Permit any statement to access-list 10
D.Remove VLAN filter test1 from DSW1
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Cisco 642-832： Practice ExamServer
Configurationon DSW1
vlan access-map test1 10drop
match ip address 10!
vlan filter test1 vlan-list 10!
ip access-list standard 10permit 10.2.0.0 0.0.255.255!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0!
The Fault Condition is related to which technology？（）
A.VLAN Access Map
B.InterVLAN communication
C.DHCP
D.IP Access List
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 isalso not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Cisco 642-832： Practice Exam
Configon R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.65.200.226 remote-as 65002
no auto-summary!
access-list 30 permit host 209.65.200.241
access-list 30 deny 10.1.0.0 0.0.255.255
access-list 30 deny 10.2.0.0 0.0.255.255!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
ip access-group 30 in
What is the solution of the fault condition？（）
A.Add permit statement for 209.65.200.224/30 network in access list 30
B.Remove Deny Statements from access-list 30
C.Change neighbor 209.65.200.226 remote-as 65002 statement to neighbor 209.65.200.226 remote-as 65001
D.Use extended access-list instead of standard access-lis
最新試題
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.
Which statement correctly describes IPsec VPN backup technology？（）
Network Topology Exhibit：Configuration Exhibit：NET（config）# access-list 112 deny icmp any any echo logNET（config）# access-list 112 deny imp any any redirect logNET（config）# access-list 112 deny icmp any any mask-request logNET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET（config）# interface Fa0/1NET（config-if）# ip access-group 112 inYou work as a network administrator at networkTut.com， study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
Authentication is the process of determining if a user or identity is who they claim to be. Refer tothe exhibit. Which statement about the authentication process is correct？（）
Which three statements accurately describe IOS Firewall configurations？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Drag the correct statements about MPLS-based VPN on the left to the boxes on the right.（Not allstatements will be used）
Which statement about PPPoA configuration is correct？（）
Drag the DSL local loop topic on the left to the correct descriptions on the right.
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）