A.Increase memory allocation for ACLs.
B.Remove all entries from the ACL and use a single permit ip any any statement.
C.Remove the log keyword from each ACL entry.
D.Reboot the device after the ACL has been applied.
您可能感興趣的試卷
你可能感興趣的試題
A.IPSec VPN
B.SSL VPN
C.port security
D.port security with statically configured MAC addresses
E.private VLANs
A.root guard
B.loop guard
C.BPDU guard
D.UDLD
E.BPDU skew detection
A.a routing protocol that is flooding updates
B.a flapping port that is generating BPDUs with the TCN bit set
C.STP is not running on the switch
D.a user that is downloading the output of the show-tech command
E.a corrupted switch CAM table
A.ip verify unicast source reachable-via any
B.ip verify unicast reverse-path
C.ip verify unicast reverse-path loose
D.ip verify unicast reverse-path strict
A.Increase the queue size of the voice class.
B.Guarantee bandwidth during congestion to the voice class with a bandwidth command.
C.Increase the tx-ring of the egress interface.
D.Implement LLQ for the voice class.
E.Decrease the rx-ring of the egress interface.
F.Decrease the queue size of the voice class.
A.It will advertise the prefix to all other client peers and non-client peers.
B.It will not advertise the prefix to EBGP peers.
C.It will only advertise the prefix to all other IBGP peers.
D.It will not advertise the prefix to any peers.
A.Link
B.NSSA external
C.Network link
D.Intra-area prefix
E.AS domain
A.6to4
B.6over4
C.ISATAP
D.6PE
E.GRE
A.Prepend extra AS hops to the BGP prefix.
B.Advertise more specific BGP prefixes（longer mask）.
C.Add（prepend）one or more communities to the prefix that is advertised by BGP.
D.Have BGP dampen the prefix.
A.the entire network switches to 802.1D and generates BPDUs to determine root bridfe status.
B.A migration delay of three seconds occurs when the port that is connected to the 802.1D bridge comes up
C.The entire network reconverges and a unique root briddge for the 802.1D segment， and a root bridge for the 802.1W segment， is chosen
D.the first hop 802.1w switch that is connected to the 802.1D runs entirely in 802.1DCompatibility mode and converts the BPDUs to either 802.1D or 802.1W segments of the network
E.Classic 802.1D timers， Such as forward Delay and Max-age， will only be used as a backup， and will not be necessary if point-to-point links and edge prots are properly identified and set by the administrator.
最新試題
Which one of the following potential issues is eliminated by using split horizon？（）
What does a unicast prefix-based IPv6 multicast address start with？（）
Policy-based routing allows network administrators to implement routing policies to allow or deny paths based on all of these factors except which one？（）
What does the OSPF command capability vrf-lite achieve？（）
For the following items，what is the mathematical relationship between the committed information rate （CIR）， committed burst （Bc）， and committed rate measurement interval （Tc）？（）
Which message type is constructed and sent from an MSDP router to its MSDP peers when it receives a PIM register message （knowing that the MSDP router is also configured as an RP for the PIM domain）？（）
In GLBP， which router will answer on client ARP requests？（）
Phase I and Phase II DMVPN differ in terms of which of these characteristics？（）
When two bridges are competing for the root bridge of an IEEE 802.1D spanning tree and both have the same bridge priority configured， which parameter determines the winner？（）
Which router is doing LSA type 7 to type 5 translation，and why？（）