A.FTP
B.Telnet
C.SMTP
D.DNS
E.HTTP
F.POP3
您可能感興趣的試卷
你可能感興趣的試題
A.console password
B.vty password
C.aux password
D.tty password
E.enable secret password
F.username password
A.It provides dynamic neighbor discovery.
B.It detects unreachable neighbors in 90 second intervals.
C.It maintains neighbor relationships.
D.It negotiates correctness parameters between neighboring interfaces.
E.It uses timers to elect the router with the fastest links as the designated router.
F.It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF
A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
A.application layer
B.session layer
C.transport layer
D.network layer
E.datalink layer
F.physical layer
A.RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.
B.RIP version 1 multicasts updates while RIP version 2 uses broadcasts.
C.Both RIP version 1 and RIP version 2 are classless routing protocols.
D.RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.
E.Both RIP version 1 and version 2 support authentication.
F.RIP version 2 sends the subnet mask in updates and RIP version 1 does not.
A.no VLANs
B.all VLANs
C.only VLANs 1 - 64
D.only the VLANs that are specified when creating the trunk
A.It creates a VLAN 999 interface.
B.It designates VLAN 999 for untagged traffic.
C.It blocks VLAN 999 traffic from passing on the trunk.
D.It designates VLAN 999 as the default for all unknown tagged traffic.
A.It checks the configuration register.
B.It attempts to boot from a TFTP server.
C.It loads the first image file in flash memory.
D.It inspects the configuration file in NVRAM for boot instructions.
A.packet switching
B.access layer security
C.path selection
D.VLAN membership assignment
E.bridging between LAN segments
F.microsegmentation of broadcast domains
A.session
B.transport
C.network
D.data link
E.physical
最新試題
An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?（）
When you are troubleshooting an ACL issue on a router,which command can help you to verify which interfaces are affected by the ACL?（）
Which device might be installed at a branch office to enable and manage an IPsec site-to-site VPN?（）
A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
Which protocol reduces administrative overhead in a switched network by allowing the configuration of a new VLAN to be distributed to all the switches in a domain?（）
A router receives information about network 192.168.10.0/24 from multiple sources.What will the router consider the most reliable information about the path to that network?（）
Which command is used to display the collection of OSPF link states?（）
Three switches are connected to one anther via trunk ports.Assuming the default switch configuration,which switch is elected as the root bridge for the spanning-tree instance of vlan 1?（）
Which cisco ios command can help to determine the timing of various debug events,relative to each other,when you are debugging a complicated router issue?（）
What is the default administrative distance of OSPF?（）