Which series of commands will configure router R1 for LAN-to-LAN communication with router R2？ The enterprise network address is 192.1.1.0/24 and the routing protocol in use is RIP.（）
A.R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.129 255.255.255.192；R1（config-if）# no shutdown
B.R1（config）# interface ethernet 0；R1（config-if）# ip address 192.1.1.97 255.255.255.192；R1（config-if）# no shutdown
C.R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.4 255.255.255.252；R1（config-if）# clock rate 56000
D.R1（config）# interface serial 0；R1（config-if）# ip address 192.1.1.6 255.255.255.252；R1（config-if）# no shutdown
E.R1（config）# router rip；R1（config-router）# network 192.1.1.4；R1（config-router）# network 192.1.1.128
F.R1（config）# router rip；R1（config-router）# version 2；R1（config-router）# network 192.1.1.0
您可能感興趣的試卷
你可能感興趣的試題
請參見圖示。當收到下列幀將會怎么做？（）
A.Router1的將剝離的源MAC地址，并將其與MAC地址0000.0c36.6965取代。
B.Router1的將剝離的源IP地址，并將其與IP地址192.168.40.1取代。
C.router1將剝離的目的MAC地址，并將其與MAC地址代替0000.0c07.4320。
D.router1將剝離的目的IP地址，并將其與192.168.40.1的IP地址替換。
E.Router1的將轉發數據包輸出接口的FastEthernet0/1。
F.router1將轉發數據包輸出接口的FastEthernet0/2。
A.4to6 routing
B.6to4 routing
C.binary routing
D.dual-stack routing
E.NextGen routing
A.Branch-Router2 is configured to send both RIPv1 and RIPv2 updates.
B.Gateway-Router is configured to only receive RIPv2 updates.
C.Gateway-router is configured to receive only RIPv1 updates.
D.Branch-Router1 is configured to only send RIPv1 updates
A.A dynamically learned MAC address is saved in the startup-configuration file.
B.A dynamically learned MAC address is saved in the running-configuration file.
C.A dynamically learned MAC address is saved in the VLAN database.
D.Statically configured MAC addresses are saved in the startup-configuration file if frames from that address are received.
E.Statically configured MAC addresses are saved in the running-configuration file if frames from that address are received.
A.172.16.0.0/18
B.172.16.0.0/16
C.172.16.0.0/20
D.172.16.0.0/21
A.added security
B.dedicated bandwidth
C.provides segmentation
D.allows switches to route traffic between subinterfaces
E.contains collisions
Refer to the exhibit.Assume that the routing protocol referenced in each choice below is configured with its default settings and the given routing protocol is running on all the routers. Which two conditional statements accurately state the path that will be chosen between networks 10.1.0.0 and 10.3.2.0 for the routing protocol mentioned？ （）
A.If OSPF is the routing protocol， the path will be from R1 to R3 to R4 to R5.
B.If OSPF is the routing protocol， the path will be from R1 to R2 to R5.
C.If OSPF is the routing protocol， the path will be from R1 to R5.
D.If RIPv2 is the routing protocol， the path will be from R1 to R3 to R4 to R5.
E.If RIPv2 is the routing protocol， the path will be from R1 to R5.
A.2 through 1001
B.1 through 1001
C.1 through 1002
D.2 through 1005
Refer to the exhibit. SW1 and SW2 have default configurations. What will happen if host 1 sends a broadcast？（）
A. Hosts 2， 3， and 4 will receive the broadcast.
B. Hosts 1， 2， 3， and 4 will receive the broadcast.
C. Host 2 and the Fa0/0 interface of R1 will receive the broadcast.
D. Hosts 1， 2 and the Fa0/0 interface of R1 will receive the broadcast.
E. Hosts 1， 2， 3， 4 and interface Fa0/0 of R1 will receive the broadcast.
F. Hosts 2， 3， 4， and interfaces Fa0/0 and Fa0/1 of R1 will receive the broadcast.
A.(config-if)#authentication ppp chap fallback ppp
B.(config-if)#authentication ppp chap pap
C.(config-if)#ppp authentication chap pap
D.(config-if)#ppp authentication chap fallback ppp
最新試題
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述？（）
請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么？（）
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是，從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題？（）
以下哪兩種介質可提供高達1Gb/s 的帶寬？（）
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確？（）
在配置路由器時，網絡技術人員想要命名路由器。輸入hostname 命令后，技術人員會看到下列哪一項提示？（）
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流？（）
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接？（）
OSI 模型的哪兩項功能在第2層實現？（）