Refer to the diagram. Which three statements describe the router port configuration and the switch port configuration as shown in the topology? （）
A.The Router1 WAN port is configured as a trunking port.
B.The Router1 port connected to Switch1 is configured using subinterfaces.
C.The Router1 port connected to Switch1 is configured as 10 Mbps.
D.The Switch1 port connected to Router1 is configured as a trunking port.
E.The Switch1 port connected to Host B is configured as an access port.
F.The Switch1 port connected to Hub1 is configured as full duplex.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the diagram. All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network?（）
A.The subnet mask in use is 255.255.255.192.
B.The subnet mask in use is 255.255.255.128.
C.The IP address 172.16.1.25 can be assigned to hosts in VLAN1
D.The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E.The LAN interface of the router is configured with one IP address.
F.The LAN interface of the router is configured with multiple IP addresses.
A.WAN switch
B.PVC
C.ATM switch
D.multiplexer
E.CSU/DSU
F.modem
A.A successor route is used by EIGRP to forward traffic to a destination.
B.Successor routes are saved in the topology table to be used if the primary route fails.
C.Successor routes are flagged as "active" in the routing table.
D.A successor route may be backed up by a feasible successor route.
E.Successor routes are stored in the neighbor table following the discovery process.
A.A WPA key is longer and requires more special characters than the WEP key.
B.The access point and the client are manually configured with different WPA key values.
C.WPA key values remain the same until the client configuration is changed.
D.The values of WPA keys can change dynamically while the system is used.
A.access-list 50 deny 192.168.1.10.0.0.255
B.access-list 110 permitip any any
C.access-list 2500 deny tcp any host 192.168.1.1eq22
D.access-list 101 deny tcp any host 192.168.1.1
A. permit ip any any deny tcp 172.16.16.0 0.0.0.255 172.17.17.252 0.0.0.0 eq 80
B. permit ip any any deny tcp 172.17.17.252 0.0.0.0 172.16.16.0 0.0.0.255 eq 80
C. deny tcp 172.17.17.252 0.0.0.0 172.16.16.0 0.0.0.255 eq 80 permit ip any any
D. deny tcp 172.16.16.0 0.0.0.255 172.17.17.252 0.0.0.0 eq 80 permit ip any any
Which routing protocols can be used within the enterprise network shown in the diagram? （）
A.RIP v1
B.RIP v2
C.IGRP
D.OSPF
E.BGP
F.EIGRP
A.A CSU/DSU terminates a digital local loop
B.A modem terminates a digital local loop
C.A CSU/DSU terminates an analog local loop
D.A modem terminates an analog local loop
E.A router is commonly considered a DTE device
F.A router is commonly considered a DCE device
A.application layer
B.session layer
C.transport layer
D.network layer
E.datalink layer
F.physical layer
A.192.168.10.80/28
B.192.168.10.80/29
C.192.168.10.96/28
D.192.168.10.96/29
最新試題
請參見圖示。下列哪組設備僅包含中間設備？（）
請參見圖示。公司路由器由于故障被更換。更換路由器之后，Education 辦公室內的主機C 和D 能夠相互ping 通，但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么？（）
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域？（）
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確？（）
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程？（）
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2？（）
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果？（）
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間，San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時，它的目的MAC 地址是什么？（）
在配置路由器時，網絡技術人員想要命名路由器。輸入hostname 命令后，技術人員會看到下列哪一項提示？（）