A.point-to-point
B.broadcast multi-access
C.nonbroadcast multi-access
D.nonbroadcast multipoint.broadcast point-to-multipoint
您可能感興趣的試卷
你可能感興趣的試題
A.client
B.dynamic
C.server
D.static
E.transparent
A.user EXEC mode
B.global configuration mode
C.privileged EXEC mode
D.auxiliary setup mode
A.application
B.internet
C.network
D.transport
A.blocking
B.learning
C.disabled
D.forwarding
E.listening
A.Router(config)#router ospf 1
B.Router(config)#router ospf 0
C.Router(config)#router ospf area 0
D.Router(config-router)#network 192.168.16.0 0.0.0.255 area 0
E.Router(config-router)#network 192.168.16.0 0.0.0.255 0
F.Router(config-router)#network 192.168.16.0 255.255.255.0 area 0
A.510
B.1022
C.1024
D.2048
A.when a packet is received from an 802.1Q trunk,the vlan id can be determined from the source MAC address table
B.unkown unicast frames are retransmitted only to the ports that belong to the same vlan
C.ports between switches should be configured in access mode so that vlans can span across the ports
D.broadcast and multicast frames are retransmitted to ports that are configured on different vlan
A.192.0.2.0
B.192.0.2.255
C.192.0.3.255
D.192.0.4.0
A.192.168.8.25
B.192.168.8.41
C.192.168.8.49
D.192.168.8.113
Refer to the exhibit.Which statement describes DLCI 17?()
A.DLCI 17 describes the ISDN circuit between R2 and R3.
B.DLCI17 describes a PVC on R2.It cannot be used on R3 or R1.
C.DLCI17 is the Layer 2 address used by R2 to describe a PVC to R3.
D.DLCI17 describes the dial-up circuit from R2 and R3 to the service provider.
最新試題
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()