A.when a packet is received from an 802.1Q trunk，the vlan id can be determined from the source MAC address table
B.unkown unicast frames are retransmitted only to the ports that belong to the same vlan
C.ports between switches should be configured in access mode so that vlans can span across the ports
D.broadcast and multicast frames are retransmitted to ports that are configured on different vlan

A.192.0.2.0
B.192.0.2.255
C.192.0.3.255
D.192.0.4.0

A.192.168.8.25
B.192.168.8.41
C.192.168.8.49
D.192.168.8.113

A.DLCI 17 describes the ISDN circuit between R2 and R3.
B.DLCI17 describes a PVC on R2.It cannot be used on R3 or R1.
C.DLCI17 is the Layer 2 address used by R2 to describe a PVC to R3.
D.DLCI17 describes the dial-up circuit from R2 and R3 to the service provider.

A.show session
B.show cdp neighbors
C.show users
D.show queue

A.RIP requires less time to converge
B.RIP uses less bandwidth
C.RIP is less complex to configure
D.RIP demands fewer router resources
E.RIP has a more accurate metric

A.transport type all
B.transport output all
C.transport preferred all
D.transport input all

A.131.1.123.30
B.131.1.123.31
C.131.1.123.32
D.131.1.123.33

A.The switch will not forward unicast frames.
B.The switch will forward the frame to a specific port.
C.The switch will return a copy of the frame out the source port.
D.The switch will remove the destination MAC from the switch table.
E.The switch will forward the frame to all ports except the port on which it was received.

A.802.1d
B.VTP
C.802.1q
D.STP
E.SAP