單項選擇題All WAN links inside the ABC University network use PPP with CHAP for authentication security. Which command will display the CHAP authentication process as it occur between two routers in the network?()

A.show chap authentication
B.show interface serial0
C.debug ppp authentication
D.debug chap authentication
E.show ppp authentication chap


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

根據下圖,網絡管理員如此配置的RA的原因是?()

A.讓students訪問Internet
B.阻止students訪問RA的命令提示符
C.阻止管理員訪問RA的控制臺
D.讓administrators訪問Internet
E.阻止students訪問Internet
F.阻止students訪問Admin的網絡

3.單項選擇題What is one reason that WPA encryption is preferred over WEP?()

A.A WPA key is longer and requires more special characters than the WEP key.
B.The access point and the client are manually configured with different WPA key values.
C.WPA key values remain the same until the client configuration is changed.
D.The values of WPA keys can change dynamically while the system is used.

5.單項選擇題Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?()

A.Set the SSID value in the client software to public.
B.Configure open authentication on the AP and the client.
C.Set the SSID value on the client to the SSID configured on the AP.
D.Configured MAC address filtering to permit the client to connect to the AP.

6.單項選擇題

根據下圖,Switch-1需要往一臺MAC地址為00b0.d056.efa4的主機發數據,Switch-1會如何處理這些數據?()

A.Switch-1會丟棄該數據,因?yàn)樗鼪]有該MAC地址條目
B.Switch-1會防洪該數據到所有的接口,除了該數據的源接口
C.Switch-1會發送ARP請求到所有的接口,除了該數據的源接口
D.Switch-1會往默認網關發送該數據

8.多項選擇題What functions do routers perform in a network (Choose two.)()。

A.packet switching
B.access layer security
C.path selection
D.VLAN membership assignment
E.bridging between LAN segments
F.microsegmentation of broadcast domai

9.單項選擇題

如下圖,兩個路由器(Atlanta和Brevard)用串口連接起來。但是他們之間沒有數據傳輸,已知Atlanta配置正確,下圖給出部分配置,路由器Brevard上導致該問題的原因是()。

A.沒有設置loopback命令
B.IP地址不正確
C.子網掩碼不正確
D.串行鏈路封裝不正確
E.最大傳輸單元(MTU)設置得太大
F.帶寬設置和直連的接口不匹配

最新試題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題