A.Router# show ip eigrp adjacency
B.Router# show ip eigrp topology
C.Router# show ip eigrp interfaces
D.Router# show ip eigrp neighbors
您可能感興趣的試卷
你可能感興趣的試題
A.A WPA key is longer and requires more special characters than the WEP key.
B.The access point and the client are manually configured with different WPA key values.
C.WPA key values remain the same until the client configuration is changed.
D.The values of WPA keys can change dynamically while the system is used.
A.255.255.255.0
B.255.255.255.240
C.255.255.255.248
D.255.255.255.252
E.255.255.255.254
A.Set the SSID value in the client software to public.
B.Configure open authentication on the AP and the client.
C.Set the SSID value on the client to the SSID configured on the AP.
D.Configured MAC address filtering to permit the client to connect to the AP.
根據下圖,Switch-1需要往一臺MAC地址為00b0.d056.efa4的主機發數據,Switch-1會如何處理這些數據?()
A.Switch-1會丟棄該數據,因?yàn)樗鼪]有該MAC地址條目
B.Switch-1會防洪該數據到所有的接口,除了該數據的源接口
C.Switch-1會發送ARP請求到所有的接口,除了該數據的源接口
D.Switch-1會往默認網關發送該數據
根據下圖,哪個交換機為打印機提供了生成樹中的指定端口角色?()
A.Switch1
B.Switch2
C.Switch3
D.Switch4
A.packet switching
B.access layer security
C.path selection
D.VLAN membership assignment
E.bridging between LAN segments
F.microsegmentation of broadcast domai
如下圖,兩個路由器(Atlanta和Brevard)用串口連接起來。但是他們之間沒有數據傳輸,已知Atlanta配置正確,下圖給出部分配置,路由器Brevard上導致該問題的原因是()。
A.沒有設置loopback命令
B.IP地址不正確
C.子網掩碼不正確
D.串行鏈路封裝不正確
E.最大傳輸單元(MTU)設置得太大
F.帶寬設置和直連的接口不匹配
A.AES
B.PSK
C.SSID
D.TKIP
E.WEP
A.session
B.transport
C.network
D.data link
E.physical
根據下圖,網絡連接到路由器R2被匯總為一條192.168.176.0/21的路由,并發給R1。哪兩個數據包目的地址R1會轉發給R2?()
A.192.168.194.160
B.192.168.183.41
C.192.168.159.2
D.192.168.183.255
E.192.168.179.4
F.192.168.184.45
最新試題
要將數據包發送到遠程網絡,應使用哪種設備?()
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()
請參見圖示。下列哪組設備僅包含中間設備?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
路由器使用哪一項信息來確定源主機和目的主機之間的路徑?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()