A.to map all the devices on a network.
B.to display the current TCP/IP configuration values.
C.to see how a device MAC address is mapped to its IP address.
D.to see the path a packet will take when traveling to a specified destination.
E.to display the MTU values for each router in a specified network path from source to a destination.
您可能感興趣的試卷
你可能感興趣的試題
A.point-to-point and multiaccess
B.point-to-multipoint and multiaccess
C.point-to-point and point-to-multipoint
D.nonbroadcast and broadcast multipoint
E.nonbroadcast and broadcast multiaccess
A.denial of service
B.brute force
C.reconnaissance
D.Trojan horse
A.access-list 50 deny 192.168.1.10.0.0.255
B.access-list 110 permit ip any any
C.access-list 2500 deny tcp any host 192.168.1.1 eq22
D.access-list 101 deny tcp any host 192.168.1.1
A.15 seconds
B.30 seconds
C.180 seconds
D.240 seconds
A.It provides dynamic neighbor discovery.
B.It detects unreachable neighbors in 90 second intervals.
C.It maintains neighbor relationships.
D.It negotiates correctness parameters between neighboring interfaces.
E.Ituses timers to elect the router with the fastest links as the designated router.
F.It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.
A.hub
B.router
C.switch
D.STP
E.subinterfaces
F.VLAN
A.The PC has connectivity with a local host.
B.The PC has connectivity with a Layer 3 device.
C.The PC has a default gateway correctly configured
D.The PC has connectivity up to Layer 5 of the OSI model
E.The PC has the TCP/IP protocol stack correctly installed.
根據下圖顯示的拓撲結構和路由器配置，一個在該LAN上的主機正在通過INTERNET訪問一個FTP服務器。下列地址中哪個可以作為路由器發送到該目的服務器的數據包的源地？（）
A.10.10.0.1
B.10.10.0.2
C.199.99.9.33
D.199.99.9.57
E.200.2.2.17
F.200.2.2.18
A.by encrypting all passwords passing through the router
B.by encrypting passwords in the plain text configuration file
C.by requiring entry of encrypted passwords for access to the device
D.by configuring an MD5 encrypted key to be used by routing protocols to validate routing exchanges
E.by automatically suggesting encrypted passwords for use in configuring the router
A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
最新試題
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址？（）
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置？（）
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么？（）
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口？（）
何時必須使用clock rate 命令配置路由器串行接口？（）
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論？（）
要將數據包發送到遠程網絡，應使用哪種設備？（）
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序？（）
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果？（）
在Cisco IOS 設備中，啟動配置文件存儲于何處？（）