A.The PC has connectivity with a local host.
B.The PC has connectivity with a Layer 3 device.
C.The PC has a default gateway correctly configured
D.The PC has connectivity up to Layer 5 of the OSI model
E.The PC has the TCP/IP protocol stack correctly installed.
您可能感興趣的試卷
你可能感興趣的試題
根據下圖顯示的拓?fù)浣Y(jié)構和路由器配置，一個在該LAN上的主機正在通過INTERNET訪問一個FTP服務器。下列地址中哪個可以作為路由器發送到該目的服務器的數據包的源地？（）
A.10.10.0.1
B.10.10.0.2
C.199.99.9.33
D.199.99.9.57
E.200.2.2.17
F.200.2.2.18
A.by encrypting all passwords passing through the router
B.by encrypting passwords in the plain text configuration file
C.by requiring entry of encrypted passwords for access to the device
D.by configuring an MD5 encrypted key to be used by routing protocols to validate routing exchanges
E.by automatically suggesting encrypted passwords for use in configuring the router
A.Configure port Fa0/1 to accept connections only from the static IP address of the server.
B.Employ a proprietary connector type on Fa0/1 that is incompatible with other host connectors.
C.Configure the MAC address of the server as a static entry associated with port Fa0/1.
D.Bind the IP address of the server to its MAC address on the switch to prevent other hosts from spoofing the server IP address.
E.Configure port security on Fa0/1 to reject traffic with a source MAC address other than that of the server.
F.Configure an access list on the switch to deny server traffic from entering any port other than Fa0/1.
A.multicast
B.broadcast
C.allcast
D.podcast
E.anycast
A.這是一個10Mb/s的交換端口
B.這是一個100Mb/s的交換端口
C.這是一個工作在半雙工模式下的以太口
D.這是一個工作在全雙工模式下的以太口
E.這是一個PC機上網卡上的一個接口
A.10 Mbps
B.11 Mbps
C.54 Mbps
D.100 Mbps
根據下圖，假設所有路由器接口都配置正確且正常工作，假設R2上OSPF配置正確，配置在R1上默認路由會怎么影響R2的工作？（）
A.任何到達一個和路由器R1非直連的網絡的數據包都會被丟棄
B.任何到達一個和路由器R2非直連的網絡的數據包都會被丟棄
C.任何到達一個和路由器R2非直連的網絡的數據包都會即時被丟棄，因?yàn)镽1上缺少網關
D.直連在R2上的網絡將不能夠和172.16.100.0，172.16.100.128，172.16.100.64這些子網通訊
E.任何目的地沒有在R2的路由表中的數據包，R2將會定向到R1，R1會發送哪個數據包到R2，這樣路由環路產生
A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst
A.to prevent unauthorized Telnet access to a switch port
B.to limit the number of Layer 2 broadcasts on a particular switch port
C.to prevent unauthorized hosts from accessing the LAN
D.to protect the IP and MAC address of the switch and associated ports
E.to block unauthorized access to the switch management interfaces over common TCP ports
A.a switch with a trunk link that is configured between the switches
B.a router with an IP address on the physical interface that is connected to the switch
C.a switch with an access link that is configured between the switches
D.a router with subinterfaces configured on the physical interface that is connected to the switch
最新試題
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2？（）
在配置路由器時，網絡技術人員想要命名路由器。輸入hostname 命令后，技術人員會看到下列哪一項提示？（）
以下哪兩種介質可提供高達1Gb/s 的帶寬？（）
OSI 模型的哪兩項功能在第2層實現？（）
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接？（）
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流？（）
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間，路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時，它的源MAC 地址是什么？（）
在路由器上使用Router#copy running-config startup-config 命令會產生什么效果？（）
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論？（）
請參見圖示。在網絡中，PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序？（）