A.show ip route
B.show route
C.traceroute
D.trace ip route
您可能感興趣的試卷
你可能感興趣的試題
A.enable cdp
B.cdp enable
C.cdp run
D.run cdp
A.data integrity
B.encryption
C.key exchange
D.authentication
A.ip default-gateway 0.0.0.0
B.ip route 172.16.2.1 0.0.0.0 0.0.0.0
C.ip default-network 0.0.0.0
D.ip default-route 0.0.0.0 0.0.0.0 172.16.2.1
E.ip route 0.0.0.0 0.0.0.0 172.16.2.1
A.point-to-point
B.broadcast multi-access
C.nonbroadcast multi-access
D.nonbroadcast multipoint
E.broadcast point-to-multipoint
A.NVRAM
B.RAM
C.FLASH
D.ROM
E.PCMCIA
A.copy running-config: TFTP
B.copy TFTP: running-config
C.copy TFTP: startup-config
D.copy startup-config: TFTP
A.SW1#shows withport port-security interface FastEthernet0/12
B.SW1#shows withport port-secure interface FastEthernet0/12
C.SW1#show port-secure interface FastEthernet0/12
D.SW1#show running-config
A.允許125.36.0.0/16網段的主機使用FTP協議訪問主機129.1.1.1;
B.不讓任何主機使用Telnet登錄;
C.拒絕一切數據包通過;
D.僅允許某個用戶從外部登錄,其他用戶不能這樣做。
A.to control vty access into a router
B.to control broadcast traffic through a router
C.to filter traffic as it passes through a router
D.to filter traffic that originates from the router
E.to replace passwords as a line of defense against security incursions
A.copy running-config startup-config
B.copy startup-config: running-config
C.copy running config startup config
D.copy startup config running config
E.write terminal
最新試題
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
在Cisco IOS 設備中,啟動配置文件存儲于何處?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()