A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch.
How would you interconnect and configure lag for connectivity and ensure redundancy？（）
A.all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
B.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
C.all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
D.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.
您可能感興趣的試卷
你可能感興趣的試題
A.50 feet [15 meters]
B.200 feet [60 meters]
C.150 feet [45 meters]
D.100 feet [30 meters]
A.gtc
B.md5
C.ms-chap v2
D.pap
A.develops a training plan and delivers via a custom workshop or e-learning
B.helps improve the performance and functionality of the infrastructure operations and network management system
C.reduces the risk of downtime caused by facilities-related problems
D.provides a step-by-step plan detailing the installation and service-commission requirement tasks to be staged in a controlled implementation environment that emulates a customer network
A.force infrastructure devices to associate only to this ssid
B.set infrastructure ssid
C.multiple bssid
D.set data beacon rate
E.enable ip redirection on this ssid
One of your customers has decided to deploy location-based services in addition to existing wireless services. the customer requires that the additional access points to be deployed in
monitor-only modE.
The most likely reason for this requirement is that the customer has which of these existing wireless devices？（）
A.data collection
B.802.11b/g voip
C.802.11b and g clients
D.rfid tags
A.igmp snooping
B.wmm
C.qos element for wireless phones
D.avvid priority mapping
A.systems integration
B.skill assessment
C.systems acceptance testing
D.wireless check
E.project close out
When optimizing a standalone point-to-multipoint bridge installation with eight non-root bridges
Which of the following rts threshold and cwmin settings would be correct for the non-root bridges？（）
A.rts threshold = 1，cwmin = 4
B.rts threshold = 4000，cwmin = 5
C.rts threshold = 4000，cwmin = 3
D.rts threshold = 1，cwmin = 5
You review the failed attempts logs on an aaa server and find： "unknown network access server error."
Which failure could produce this error？（）
A.aaa client and aaa server handshake failure
B.supplicant authentication failure
C.wrong password used by the supplicant
D.failure of the wireless client and aaa server handshake
During the installation of the cisco wcs version 4.0，an error occurs.
Where would you look for the installation log，in order to learn more about this error？（）
A.at the root of the installation drive
B.in the cisco wcs installation directory
C.on the desktop of the server
D.in the cisco wcs\logs directory
最新試題
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped.What may cause this problem？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
The Cisco Wireless Location Appliance provides an audit trail for each device tracked for up to how many days？（）