A. complete SNP (CSNP)
B. partial SNP (PSNP)
C. hello
D. database query
E. database description packet (DDP)
您可能感興趣的試卷
你可能感興趣的試題
A. complete SNP (CSNP)
B. partial SNP (PSNP)
C. database query
D. database description packet (DDP)
E. link - state summary
F. hello
A. Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command.
B. Configure the net sy stem - id and the network net - id commands under routerisis.
C. Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command.
D. Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis.
E. Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.
A. P1R1 is the exi t point out of the area for P1R3.
B. P1R1 is a level - 1 only IS - IS router.
C. P1R1 has been configured with a nondefault IS - IS metric.
D. P1R3 is a level - 2 only IS - IS router.
E. P1R3has been configured with a nondefault IS - IS metric.
F. P1R3 routing ta ble should contain i L2 entries.
What will happen after redistributing other routing protocol routes into OSPF? （）
A. miss the metric option in the redistribute command.
B. misconfigure the metric- type option in t he redistribute command to type - 1.
C. miss the subnet option in the redistribute command.
D. miss the tag option in the redistribute command.
Based on the show ip route isis output on R1, which statement is true? （）
A. The i su 10.1.0.0/23 route is a suppressed route.
B. The i su 10.1. 0.0/23 route is a summary route.
C. The i su 10.1.0.0/23 route is an IS - IS external route.
D. The R1 IS - IS router is an ASBR.
E. The R1 IS - IS router is an ABR that belongs to multiple IS - IS areas.
F. The R1 IS - IS router is performing route aggregation and is suppressing the more specific 10.1.0.0/23 prefix.
Given the network diagram, which routers currently make up the IS - IS backbone?（）
A. R3,R4,R6
B. R2,R3,R6,R7
C. R1 through R8
D. R3,R4,R5,R6
E. R2,R3,R4,R6,R7
A. support for designated intermediate systems and backup designated intermediate systems
B. support for multip le areas per router
C. support for classless routing
D. support for address summarization between areas
E. support for both DIS adjacencies and neighbor adjacencies
According to the following output, can you tell me which command can redistribute IGRP into EIGRP?（）
A. Under t he router eigrp mode add redistribute igrp 123 subnets
B. Under the router igrp mode add redistribute eigrp 123
C. None, EIGRP and IGRP are automatically redistributed in this instance.
D. Under the router eigrp mode add redistribute igrp 123
A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C. Which configuration on Router B will achieve the desired effect?（）
A.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 1 72.16.14.4
B.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.3
C.access - list 1 permit 172.16.10.0 0.0.0.255 ! interface e0 ip polic y route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
D.access -list 1 deny 172.16.10.0 0.0.0.255 ! interface s0 ip policy route - map policy ! route - map policy permit 10 match ip address 1 set ip next - hop 172.16.12.2
During the redistribution process configured on RTA, some of the EIGRP routes, such as 10.1.1.0/24 and 10.2.2.0/24,are not being redistributed into the OSPF routing domain. Which two items could be a solution to this proble m?（）
A. Change the EIGRP AS number from 100 to1 in the redistribute command.
B. Add the subnets option to the redistribute command.
C. Change the metric - type to2 in the redistribute command.
D. Configure the redistribute command under router eigrp 1 i nstead.
E. Change the metric to an EIGRP compatible metric value (bandwidth, delay, reliability, load, MTUs) in the redistribute command.
最新試題
An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?（）
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exis ts in a planning document intended to be used to copy/paste into Router R1 to enable EIGRP for IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about EIGRP for IPv6 on R1 after this configuration has been pasted into R1?（）ipv6 router eigrp 1ipv6 unicast- routinginterface f0/0ipv6 address 2000::1/64ipv6 eigrp 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 eigrp 1
Which of the following answers lists a multicast IPv6 address?（）
Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1's interface S0/0?（）
The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in this case?（）D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive
An engineer is trying to summarize the following networks using the "ip summary- address eigrp"command:10.8.88.0/2510.8.89.48/2910.8.64.96/27Which network and subnet mask below would be the smallest EIGRP summary address to include all three subnets?（）
Which of the following is the shortest valid abbreviation for FE80:0000:0000:0000:0010:0000:0000:0123?（）
The following configura tion exists on a router on one end of an IPv6 tunnel. Which type of tunnel is created by this configuration?（）interface loopback 1ip address 1.1.1.1 255.255.255.255interface tunnel 2ipv6 address 2000::1::/64tunnel source loopback 1tunnel destina tion 2.2.2.2tunnel mode ipv6ipipv6 eigrp 1
Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, destined for an Enterprise network.Which of the following answers best describes the router's logic that tells the router, for a given packet, to apply GRE encapsulation to the packet?（）
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?（）ipv6 unicast- routinginterface f0/0ipv6 rip one enableipv6 address 2000::1/64interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 rip one enable