A. Only routers can split boundaries (horizons) between concentric networks.
B. Each AS must keep routing tables converged to prevent dead routes from being advertised across boundaries.
C. Networks can only remain fully converged if all information is sent out all active interfaces.
D. Information about a route should not be sent back in the direction from which the original update came.
E. Distance vector protocols need fall back routers that are responsible for momentary loops.
您可能感興趣的試卷
你可能感興趣的試題
A. SPF packets
B. hello packets
C. keepalive packets
D. dead interval packets
E. LSU packets
A. LSAs from other routers
B. Beacons received on point-to-point links
C. hello packets
D. Routing tables received from neighbors
E. SAP packets sent by other routers
F. TTL packets from exclusive routers
A.127.0.0.1
B.192.168.0.5
C.223.0.0.1
D.172.16.0.1
E.224.0.0.5
F.254.255.255.255.255
A. IGRP has a faster update timer.
B. IGRP has a lower administrative distance.
C. RIP has a higher metric value for that route.
D. The IGRP route has fewer hops.
E. The RIP path has a routing loop.
A. All entries in the topology database will be included on each router.
B. All routers in the same OSPF area will have one topology database.
C. The Dijkstra algorithm is used in the creation of the topology database.
D. LSA packets are used to update and maintain the topology database.
A. It is needed to identify a unique instance of an OSPF database.
B. It is an optional parameter only necessary if multiple OSPF processes are used.
C. It is locally significant.
D. It is globally insignificant
E. All routers in the same OSPF area must have the same process ID to exchange routing information.
A. Has a maximum hop count of 25
B. Can differentiate between internal and external routes
C. Uses a 32-bit metric
D. Can maintain only one routing table
E. Need all networks to use the same subnet mask
F. Supports only one routed protocol
A. Every 5 minutes
B. Every 90 seconds
C. Every 60 seconds
D. Every 30 seconds
A. Point-to-point and point-to-multipoint networks
B. Nonbroadcast and broadcast multipoint multicasting
C. Point-to-point and multi-access broadcasting
D. Point-to-multipoint and multi-access broadcasting
E. Nonbroadcast and broadcast multi-access
A. Hierarchical OSPF networks need to be in one area
B. Multiple OSPF areas must connect to area 0
C. Single area OSPF networks must be configured in area 1
D. Areas can be assigned any number from 0 to 63535
E. Area 0 is called the backbone area
F. Each OSPF area need to be configured with a loopback interface
最新試題
What does a configuration Register Setting of 0x2105 indicate to the Router? （）
How many usable sub network and usable hosts per subnet result in the network address 201.105.13.0 is sub netted with a mask of /26? （）
An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? （）
What should the configuration register value be after successfully completing the password recover procedure and returning the router to normal operation? （）
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
Which of the following correctly describe steps in the OSI data encapsulation process?（）
What feature of a networks switch allows an administrative to create separate broadcast domains?（）
Which of the following options lists the steps in PPP session establishment in the correct order?（）
The network 172.12.0.0 needs to be divided into subnets where each subnet has the capacity of 458 IP addresses.What would be the correct subnet mask to accomplish this division keeping the number of subnets at the maximum? （）
New switches have been purchased for a network upgrade. The objective for the network design emphasizes efficient, error-free transport instead of fast transport.Which switching mode should be configured on the new switches to provide error-free transport to the network? （）