A new lightweight access point (LAP) has been installed in the Company WLAN.
Which two statements correctly describe the association process between this LAP and a WLAN controller? ()
A. An access point will search for a controller using a broadcast address if using LWAPP Layer 2 and a unicast address if using LWAPP Layer 3 mode.
B. If multiple wireless controllers are detected by an access point, the controller with the fewest associated access points is chosen to associate with.
C. In order to associate in Layer 3 mode, the access point must have been preconfigured with an IP address.
D. Once an access point associates with a controller in LWAPP Layer 3 mode, it receives an IP address from the controller.
E. An access point first searches for a controller in LWAPP Layer 2 mode. If the search is not successful, the access point then attempts to locate a controller in LWAPP Layer 3 mode.
F. If multiple wireless controllers are detected by an access point, all of them will be used and traffic will be load balanced.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit.
What type of message will be used by the lightweight access point (LAP) in an attempt to locate the wireless LAN controller (WLC)? ()
A. The LAP will send out a DNS request. In return, the DNS server will provide the WLC domain name.
B. The LAP will send out a Layer 3 LWAPP discovery request to the WLC on the wireless network.
C. The LAP will send out a DHCP request. In return, the DHCP server will provide the IP addresses for the LAP and the WLC.
D. The LAP will send out a Layer 2 LWAPP discovery request to the WLC on the wireless network.
You work as a network technician at Company. Your boss, Ms., is interested LWAPP (Lightweight Access Point Protocol). In particular she wants to know which type of activities this protocol defines.
What should you tell her? ()
A. Layer 3 addressing and distribution
B. SNMP monitoring services
C. Access point certification and software control
D. Packet encapsulation, fragmentation, and formatting
E. Compression and Layer 3 address mapping
F. User behaviors
You work as a network technician at Company. Your boss, Mrs., is interested in LWAPP (Lightweight Access Point Protocol).
What should you tell her regarding this technology? ()
A. LWAPP is a proprietary protocol, and because of its very high overhead it is not widely adopted.
B. Control traffic is encapsulated in UDP packets with a source port of 1024 and a destination port of 12223.
C. Layer 3 LWAPP is a UDP/IP Frame that requires a Cisco Aironet AP to obtain an IP address using DHCP.
D. Data traffic is encapsulated in UDP packets with a source port of 1024 and a destination port of 12223.
E. Control traffic is encapsulated in TCP packets with a source port of 1024 and a destination port of 12223.
F. Data traffic is encapsulated in TCP packets with a source port of 1024 and a destination port of 12223.
You work as a network technician at Company. Your boss, Mrs., is interested in the Cisco Compatible Extensions program.
What are three features of this program? ()
A. Accounting
B. Analog and digital voice
C. Mobility
D. Security
E. Routing and switching
F. VLAN and QoS
The LWAPP (Lightweight Access Point Protocol) is in use within the Company wireless LAN.
Which statement is true about this protocol?()
A. Real-time frame exchange is accomplished within the access point.
B. The control traffic between the client and the access point is encapsulated with the LWAPP.
C. Authentication, security, and mobility are handled by the access point.
D. Data traffic between the client and the access point is encapsulated with LWAPP.
E. None of the other alternatives apply
LDAP is being utilized throughout the Company Wireless network.
Which issue or set of issues does the Lightweight Access Point Protocol (LWAPP) address? ()
A. Reduction of processing in wireless controllers
B. Distributed approach to authentication, encryption, and policy enforcement
C. Access point discovery, information exchange, and configuration
D. Provides security by blocking communication between access points and wireless clients
E. None of the other alternatives apply.
Study the exhibit shown below carefully. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility (ASTU) has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop as shown:
What is the significance of this icon? ()
A. It indicates that the client adapter is not associated to an access point or another client.
B. It indicates that the radio of the client adapter is disabled.
C. It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated.
D. It indicates that the client adapter is associated to an access point or another client, that theuser is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor.
E. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair.
F. It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good.
Which three statements are true about implementing wireless LANs in the Company network using Cisco devices?()
A. Antenna power is a relative value reference to dBi.
B. LWAPP allows encrypted communications between lightweight access points and WLAN controllers.
C. Characteristics of antennas are directionality, gain, and polarization.
D. Power over Ethernet (PoE) is only available when a WLAN controller is integrated into the network.
E. The WLAN solution Engine (WLSE) is used to control lightweight access points.
F. One of the advantages of the lightweight WLAN solution is that the devices act indepently.
Under which three conditions does a client initiate roaming between wireless cells in the Company WLAN? ()
A. The access point has broadcast too many SSIDs.
B. The wireless client has missed too many beacons from the access point.
C. The maximum data retry count, initiated by the wireless client, is exceeded.
D. The wireless client has reduced the data rate.
E. The access point has requested client reauthentication.
F. The wireless client has missed too many IAPP (Inter Access Point Protocol) updates.
Refer to the exhibit. The wireless user is moving from right to left towards AP2.
What are three reasons that the wireless client would initiate roaming?()
A. The minimum data retry count from AP1 is exceeded.
B. The maximum data retry count from AP1 is exceeded.
C. The client has missed too many beacons from AP1.
D. The client data rate from AP1 has been reduced.
E. The client has received too many beacons from AP2.
F. The client data rate from AP2 has been increased.
最新試題
Based on the show spanning-tree vlan 200 output shown in the exhibit, which two statements about the STP process for VLAN 200 are true? ()
Refer to the exhibit. Which Virtual Router Redundancy Protocol (VRRP) statement is true about the roles of the master virtual router and the backup virtual router?()
Which two statements are true about BPDU port-guard and BPDU filtering?()
During routine maintenance, G1/0/1 on DS1 was shutdown. All other interface were up. DS2 became the active HSRP device for Vlan101 as desired. However, after G1/0/1 on DS1 was reactivated. DS1 did not become the active HSRP device as desired. What need to be done to make the group for Vlan101 function properly ? ()
Refer to the exhibit. Switch S2 contains the default configuration. Switches S1 and S3 both have had the command spanning-tree mode rapid-pvst issued on them. What will be the result?()
DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ? ()
How are STP timers and state transitions affected when a topology change occurs in an STP environment?()
Which three statements are true of the Link Aggregation Control Protocol (LACP)?()
Refer to the exhibit. What command was issued on the Layer 3 switch Sw1 between Exhibit #1 and Exhibit #2?()
Refer to the exhibit. Initially, LinkA is connected and forwarding traffic. A new LinkB is then attached between SwitchA and HubA. Which two statements are true about the possible result of attaching the second link?()