A.involution
B.encoding
C.sampling
D.quantization
E.compression
F.companding
您可能感興趣的試卷
你可能感興趣的試題
A.provide visibility into the classes of service deployed using system logging and SNMP traps
B.determine WAN settings for fragmentation， compression， encapsulation， and Frame Relay-ATM interworking
C.enable the AutoQoS VoIP for voice traffic
D.generate and deploy MQC-based QoS policies
E.profile the traffic with Auto-Discovery
A.large files are being downloaded over the WAN network
B.IP phone traffic is not being classified correctly
C.more bandwidth is required for the office LAN
D.Call Admission Control has not been implemented
E.employees are watching videos over the internet
F.header compression is not being used
A.business-critical traffic includes VoIP and voice signaling packets
B.SDM can be used to configure a basic QoS policy for incoming traffic on WAN interfaces andIPsec tunnels
C.SDM can provide QoS for real-time traffic and business-critical traffic
D.SDM creates a custom-queuing （CQ） or a priority-queuing （PQ） policy
E.SDM creates a low latency queuing （LLQ） service policy with its associated classes
F.when allocating bandwidth， values can be entered in either bandwidth percentage or kilobytes per second （kBps）
A.configuration of APs
B.auto discovery of rogue APs
C.reporting
D.WLSE in two versions： base and location
E.graphical view of multiple controllers and managed APs
A.protocol type
B.CoS
C.DSCP
D.IP precedence
E.destination address
F.input interface
A.QoS preclassification is only supported on generic routing encapsulation （GRE） and IPsec VPNs
B.QoS preclassification is not required in Layer 2 Tunneling Protocol （L2TP）， Layer2 Forwarding （L2F）， and Point-to-Point Tunneling Protocol （PPTP） VPNs
C.QoS preclassification is supported on IPsec AH VPNs， but not on IPsec ESP VPNs
D.the QoS-for-VPNs feature （QoS preclassification） is designed for VPN transport interfaces
E.with IPsec tunnel mode， the type of service （ToS） byte value is copied automatically from the original IP header to the tunnel header
A.timing
B.queuing
C.differential
D.serialization
E.packetization
F.propagation
A.latency must be kept below 150 ms
B.latency is not a concern as long as jitter is kept below 30 ms
C.voice packets do not require a specific type of queuing
D.voice packets are rather small
E.voice packets require TCP for rapid retransmission of dropped packets
F.voice packets require a fairly constant bandwidth reserved for voice control traffic as well as forthe voice payload
A.header compression
B.payload compression
C.low latency queuing （LLQ）
D.weighted random early detection （WRED）
E.traffic policing
F.traffic shaping
A.a drawback of implementing RSVP is the requirement to migrate to a supporting routing protocol
B.RSVP uses DSCP to signal QoS requirements to routers
C.RSVP is a routing protocol
D.RSVP is an IP protocol that uses IP protocol ID 46， and TCP/UDP ports 3455
E.RSVP specifically provides a level of service for rate-sensitive and delay-sensitive traffic
F.the flow-based approach of RSVP is ideal for large， scalable implementations such as the public internet
最新試題
Within the WMM policy， how many default QoS radio access categories are there？（）
In the design of a QoS solution， which two factors should be taken into consideration？（）
Which option correctly identifies the four main menus of a Cisco Wireless Control System （WCS）？ （）
End-to-end QoS is maintained in the Cisco WLAN deployment model by utilizing what parameter in lieu of 802.1p？（）
What are two ways to minimize the delay of VoIP packets that are traversing a network？ （）
In a VoIP network， which type of interface would an analog fax machine connect to？（）
What are three Cisco Unified CallManager features？ （）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM？（）
For delay sensitive traffic， what are the three best ways that are used to prevent packet loss？ （）