問答題what is the purpose of CIDR?

您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題You work as a network engineer for the company,you want to configure two BGP speakers to form an EBGP session across a firewall. On the engineer’s network,the firewall always permits TCP sessions that are initiated from the inside network (the network attached to the inside interface of the firewall). What prerequisite is there for enabling BGP to run on this network?()

A.EBGP multihop will need to be configured for this to work.
B.This should work with normal BGP peering,with no additional configuration on the BGP speakers or the firewall.
C.The BGP protocol port must be opened on the firewall
D.There is no way to make BGP work across a firewall.

3.單項選擇題Multi Protocol Label Switching (MPLS) is a data-carrying mechanism that belongs to the family of packet-switched networks. For an MPLS label,if the stack bit is set to1,which option is true?()

A.The stack bit will only be used when LDP is the label distribution protocol
B.The label is the last entry in the label stack.
C.The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.
D.The stack bit is reserved for future use.

7.單項選擇題While deploying a new switch,you accidently connect ports 3/12 and 3/18 together,creating a loop.STP detected it and placed port 3/18 in blocking mode. Why did STP not place port 3/12 in blocking mode instead?()

A.Port 3/12 was already up and forwarding before the loop was created.
B.Port priority is based on lowest priority and lowest port number.
C.You connected the wire on port 3/18 last.
D.None of the above, it is purely random.

10.單項選擇題What are the mandatory,well-known BGP attributes?()

A.origin,AS-path,next-hop
B.AS-path,origin,MED
C.AS-path,origin,weight
D.AS-path,weight,MED

最新試題

The following configuration line was added to router R1 Access-list 101 permit ip 10.25.30.00.0.0.255 any What is the effect of this access list configuration?()

題型:?jiǎn)雾?xiàng)選擇題

A network administrator is troubleshooting the OSPF configuration of routers R1 and R2.The routers cannot establish an adjacency relationship on their common Ethernet link.The graphic shows the output of the show ip ospf interface e0 command for routers R1 and R2.Based on the information in the graphic,what is the cause of this problem?()

題型:?jiǎn)雾?xiàng)選擇題

hsrp speak狀態是什么意思?

題型:?jiǎn)柎痤}

一堆交換機一個server、一個transpare,問配置prune在哪里配置?

題型:?jiǎn)柎痤}

Refer to the exhibit.How many broadcast domains exist in theexhibited topology?()

題型:?jiǎn)雾?xiàng)選擇題

Refer to the exhibit.The network administrator is in acampus building distant from Building B.WANRouter is hosting a newly installed WAN link on interface S0/0.The new link is not functioning and the administrator needs to determine if the correct cable has been attached to the S0/0 interface.How can the administrator accurately verify the correct cable type on S0/0 in the most efficient manner?()

題型:?jiǎn)雾?xiàng)選擇題

What field in IP packet is used for classification by QOS?

題型:?jiǎn)柎痤}

Refer to the exhibit.Which statement describes DLCI 17?()

題型:?jiǎn)雾?xiàng)選擇題

When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?()

題型:?jiǎn)雾?xiàng)選擇題

As a CCNA candidate,you must have a firm understanding of the IPv6 address structure.Refer to IPv6 address,could you tell me how many bits are included in each filed?()

題型:?jiǎn)雾?xiàng)選擇題