您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit. In this network， R1 is configured not to perform autosummarization within EIGRP. What routes will R3 learn from R2 through EIGRP？（）
A.172.30.1.0/24 and 10.1.2.0/24； EIGRP only performs autosummarization at the edge between two major networks.
B.172.30.0.0/16 and 10.1.2.0/24； R2 will perform autosummarization， although R1 will not.
C.Since R2 is configured without autosummarization， it will not propagate the 172.30.1.0/24 route.
D.172.30.0.0/8 and 10.0.0.0/8.
A.loop guard
B.storm control
C.storm suppression
D.broadcast suppression
E.BPDU guard
A.The IOS default is for a last-hop router to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
B.The IOS default is for every one of the routers on the shared tree to trigger a switch to the shortest path tree as soon as a new source is detected on the shared tree.
C.The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "infinity."
D.The default behavior of switching to the shortest path tree as soon as a new source is detected on the shared tree can be disabled by setting the value in the ip pim spt-threshold command to "zero."
Refer to the exhibit. In this network， R1 has been configured to advertise a summary route， 192.168.0.0/22， to R2. R2 has been configured to advertise a summary route， 192.168.0.0/21， to R1. Both routers have been configured to remove the discard route （the route to null created when a summary route is configured） by setting the administrative distance of the discard route to 255.What will happen if R1 receives a packet destined to 192.168.3.1？（）
A.The packet will loop between R1 and R2.
B.It is not possible to set the administrative distance on a summary to 255.
C.The packet will be forwarded to R2， where it will be routed to null0.
D.The packet will be dropped by R1， since there is no route to 192.168.3.1.
A.Multicast Source Discovery Protocol mesh-groups must be configured between the two anycast RPs.
B.The RPs must be within the same IGP domain.
C.Multicast Source Discovery Protocol must be configured between the two anycast RPs.
D.The two anycast RPs must be IBGP peers.
A.enable a Cisco router to "passively" listen to Auto-RP packets without the router actively sending or forwarding any of the packets
B.allow Auto-RP packets in groups 224.0.1.39 and 224.0.1.40 to be flooded in dense mode out interfaces configured with the ip pim sparse-mode command
C.enable the use of Auto-RP on a router
D.configure the router as an Auto-RP mapping agent
最新試題
什么問(wèn)題導(dǎo)致SERVER VTP密碼跟替他交換機(jī)VTP密碼不匹配？
As a CCNA candidate,you must have a firm understanding of the IPv6 address structure.Refer to IPv6 address,could you tell me how many bits are included in each filed?（）
When upgrading the IOS image,the network administrator receives the exhibited error message.What could be the cause of this error?（）
A default Frame Relay WAN is classified as what type of physical network?（）
Refer to the exhibit.What is the meaning of the term dynamic as displayed in the output of the show frame-relay map command shown？（）
Which of the following are key characteristics of PPP?（）
what is four ospf area type？
four switches， which one will be root switch.（no pic）.
Which of the following describes the roles of devices in a WAN?（）
QoS Mechanisms：?jiǎn)栐诓渴餛oS中要用的3個(gè)mechanisms是什么？