A.2031:0:130F::9C0:876A:130B
B.2001:0DB8:0000:130F:0000:0000:08GC:140B
C.2001:0DB8:0:130H::87C:140B
D.2031::130F::9C0:876A:130B
您可能感興趣的試卷
你可能感興趣的試題
A.ARP
B.SSH
C.Telnet
D.WEP
E.SNMPv1
F.SNMPv2
Refer to the exhibit.The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem?()
A.Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B.Ensure that cables A and B are straight-through cables.
C.Ensure cable A is plugged into a trunk port.
D.Ensure the switch has power.
E.Reboot all of the devices.
F.Reseat all cables.
A.configure static frame relay map entries for each subinterface network.
B.remove the ip address from the physical interface
C.create the virtual interfaces with the interface command
D.configure each subinterface with its own IP address
E.disable split horizon to prevent routing loops between the subinterface networks
F.encapsulate the physical interface with multipoint PPP
A.傳輸層把一個數據流分成段,并可以增加可靠性和流控制信息。
B.數據鏈路層增加物理源和目的地地址以及一個FCS字段。
C.當網絡層封裝源和目的地主機的地址和協議相關的控制信息的幀分組被創建。
D.當網絡層增加了第3層的地址和控制信息,以一個段分組被創建。
E.表示層轉換位成電壓為通過物理鏈路傳輸。
A.會話
B.網絡
C.物理
D.數據鏈路
E.傳輸
A.Erase flash.
B.Restart the switch.
C.Delete the VLAN database.
D.Erase the running configuration.
E.Erase the startup configuration.
F.Modify the configuration register.
A.這是一個為10Mb / s交換機端口。
B.這是一個的100Mbs交換機端口。
C.這是一個以太網端口工作在半雙工模式。
D.這是一個以太網端口工作在全雙工模式。
E.這是在一臺PC的網絡接口卡的端口。
A.VTP allows routing between VLANs.
B.VTP allows a single switch port to carry information to more than one VLAN.
C.VTP allows physically redundant links while preventing switching loops.
D.VTP simplifies switch administration by allowing switches to automatically share VLAN configuration information.
E.VTP helps to limit configuration errors by keeping VLAN naming consistent across the VTP domain.
F.VTP enhances security by preventing unauthorized hosts from connecting to the VTP domain.
A.::
B.::192:168:0:1
C.2000::
D.2001:3452:4952:2837::
E.2002:c0a8:101::42
F.2003:dead:beef:4dad:23:46:bb:101
A.SMTP
B.Telnet
C.FTP
D.DNS
最新試題
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
要將數據包發送到遠程網絡,應使用哪種設備?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()
請參見圖示。下列哪組設備僅包含中間設備?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()